Cup Grinder Diamond cup wheel Type-H 125mm

The PREMIUM laboratory cutting disc is a high-performance cutting disc for ferrous metals such as steel and stainless steel. It is used for cutting samples in the laboratory. It is important to cut them quickly, without tarnishing damage (structural changes), workpiece deformation or cracks. They are mainly installed on wet cutting systems with manual or automatic feed at a maximum working speed of 50 m/s. The workpiece must be fixed during processing. The workpiece must be fixed during processing and the disc must not be subjected to any lateral load. Laboratory cutting discs are available in different specifications: soft for 60.5-72.3 HRC, medium for 22.0-60.5 HRC, hard less than 22.0 HRC

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

tesa 4024 PV 4 is an adhesive packaging tape based on a PP film and a special acrylate dispersion adhesive. The product is characterised by a balanced ratio of high tack and high shear strength. The universal packaging tape can be used on all commercially available hand dispensers.

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

Concrete Worker ist eine universelle Diamanttrennscheibe mit 10 mm gesinterten Segmenten mit einer längeren Lebensdauer. Diese Scheiben müssen weniger häufig ausgetauscht werden. Diese Art von Sägeblatt eignet sich besonders für Bauarbeiten sowie für Fliesen- und Klinkerarbeiten, bei denen die Materialien hart sind und präzise Schnitte erfordern. Sie können auch zum Schneiden durch Beton und Ziegel verwendet werden, und sind daher vielseitig einsetzbar. Ein weiterer Vorteil eines Diamantblatts besteht darin, dass es sowohl in nassem als auch in trockenem Zustand schneiden kann. Es kann auch zum Schneiden unterschiedlich dicker Materialien verwendet werden – von dünnen Fliesen bis hin zu dicken Betonblöcken.

SDS-Plus Bohrhammer mit 4-Blatt-Bohrer und hochwertigem Spezialstahl im Kern. Der Bohrer durchtrennt die Armierung ohne seitlich wegzurutschen. Geeignet für Beton mit oder ohne Armierung, Naturstein, Ziegel und ähnliche Materialien. Die Bohrer sind in vielen verschiedenen Längen und Durchmessern erhältlich.