Pipeworker band saw blade 730.00mm

A white, glass cloth film tape with an acrylic adhesive that offers superior product performance and flame retardant properties for aircraft maintenance and repair.

NORSE Diamond ist eine universelle Diamant Kreissägeblatt mit 10 mm großen gesinterten Segmenten, die eine längere Lebensdauer und weniger Scheibenwechsel ermöglicht.   Diese Art von Sägeblatt ist besonders nützlich bei Bau- und Konstruktionsarbeiten sowie bei Fliesenarbeiten, wo die Materialien hart sind und präzise Schnitte erfordern.   Sie können auch zum Schneiden von Beton und Ziegeln verwendet werden, was sie bei vielen verschiedenen Projekten sehr nützlich macht.

The PREMIUM laboratory cutting disc is a high-performance cutting disc for ferrous metals such as steel and stainless steel. It is used for cutting samples in the laboratory. It is important to cut them quickly, without tarnishing damage (structural changes), workpiece deformation or cracks. They are mainly installed on wet cutting systems with manual or automatic feed at a maximum working speed of 50 m/s. The workpiece must be fixed during processing. The workpiece must be fixed during processing and the disc must not be subjected to any lateral load. Laboratory cutting discs are available in different specifications: soft for 60.5-72.3 HRC, medium for 22.0-60.5 HRC, hard less than 22.0 HRC

This fibre disc was specially developed for quality-conscious end users with low consumption. It offers a fast way to remove material and work comfortably with low vibration. Based on a mixture of aluminium oxide, it can be used universally. Our range includes fibre discs in grit sizes 24 to 120.

The lambskin polishing discs are used on backing pads with hooks and are particularly suitable for dark paint systems.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo disposable lightweight bonnet S533L with integrated head holder, white, robust, crackle-free and low-lint material, additional protection for neck and shoulder area, size M/L Material: Ventflex