Variants
Ready for immediate dispatch, delivery time approx. 1 - 3 working days
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
- Evaporates quickly and residue-free
- Isopropanol approx. 99.9%
- fast and residue-free evaporation
- No regreasing
- Spray can
- Contents: 500ml / 650ml can volume
- Optimum adhesion for the adhesive tape
- Reduced reworking
- Process reliability
- No regreasing
- For legal reasons, this isopropanol is not approved for the treatment of mould or for disinfection!
- For degreasing, cleaning and preparing parts to be joined before bonding
- For use on metals, painted surfaces and many plastics
- The surface should be checked for compatibility before use
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261 Avoid breathing aerosol.
P271 Use only outdoors or in a well-ventilated area.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P312 If you feel unwell, call a POISON CENTER/doctor.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F. P501 Dispose of contents/container in accordance with national regulations.
Hazardous components for labelling: Isopropanol
Additional labelling regulations:
May form explosive mixture without adequate ventilation.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing.
P312 If you feel unwell, call a POISON CENTRE/doctor.
P501 Entsorgung des Inhaltes / des Behälters gemäß der örtlichen / regionalen / nationalen / internationalen Vorschriften.
Log in