S-K-S 991 Sandblasting tape Fabric tape, 3-ply on roll, 0.9mm, 150mmx25m silver

With the next generation of PREMIUM cut-off wheels for stainless steel, you can increase performance while significantly reducing tool wear. We supply super-thin cut-off wheels from 0.75 to 1.6 mm thick. They are particularly suitable for thin-walled sheets, profiles and pipes, but also for reinforcing bars. This cutting disc also offers effortless processing of small cross-sections and bars made of stainless steel, corrosion-resistant or acid-resistant stainless steel. The chemical purity of these tools is a prerequisite for processing stainless steel grades in order to avoid negative effects on the material such as corrosion, pitting or a reduction in fatigue strength.

Brushes are particularly suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Knotted brushes are suitable for roughening, deburring, descaling, matting and cleaning. These brushes are characterised by their high flexibility. The resulting centrifugal force causes the brush to open. Particularly suitable for cleaning the inside of pipes. Crimped brushes are suitable for roughening, deburring, descaling, matting and cleaning. For removing burrs and rust as well as rubber and other dirt in hard-to-reach areas. Brushes with plastic ensure a longer service life.

The FPCs pre-assembled with 3M 9077 can be inserted into the lead-free soldering process (peak temperature 260°C, 20 sec.). The protective cover remains largely undamaged and can be easily removed. The acrylate adhesive film 9077 has good peel strength even at high temperatures. Due to the carrier material, this adhesive tape also has excellent punchability. The low outgassing of the adhesive minimises contamination of electronic components.

Fibre discs offer a very simple and quick way to remove material. A low level of vibration ensures comfortable working. This fibre disc was designed for steel and is based on a mixture of zirconium corundum. This fibre disc is available in our range in grit sizes 24 to 120.

Scotchgard Surface Protection Film 2200 protects stone and vinyl floors, bathroom surfaces and walls from the daily challenges they are exposed to, e.g. heavy traffic, spillages, liquid spills, trolley wheels or office chairs. The film can be easily applied to the floor and reduces the need for basic cleaning and recoating. Suitable for waxed vinyl floors, sealed concrete, marble, ceramic tiles and terrazzo, among others.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M206 with comfort face seal and polycarbonate visor, clear