Tesa 60042 Adhesive Remover Adhesive Remover 200ml colourless

€8.20* % €0.00* (0.00% saved)
Unit price: €8.20* % €0.00*
Unit price (net): €6.89 % €0.00
Contents: 0.2 liter (€41.00* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days


So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "Tesa 60042 Adhesive Remover Adhesive Remover 200ml colourless"

tesa ADHESIVE REMOVER 60042 is a spray for easy removal of adhesive residues from plastic parts, glass and metal surfaces.

Properties
  • Industrial cleaner
  • The spray also reaches deeper and hard-to-reach areas
  • Leaves a pleasant odour
  • Evaporates without leaving any residue
  • Allows easy removal of label stickers
  • Reliably removes residues from a wide range of adhesive tapes as well as grease, tar, resins and other soiling
Advantages
  • Adhesive remover spray, 200 ml
Product benefits
  • tesa ADHESIVE REMOVER 60042 was developed for * General industrial applications * Trade and craft * In production processes, factories * Applications in the automotive sector tesa ADHESIVE REMOVER 60042 is also suitable for applications in the automotive sector
Signal word
Danger
Hazard pictogram(s)

Flamme

Ausrufezeichen

Umwelt

Hazard statement / CLP

H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated. 
H315 Causes skin irritation. 
H317 May cause an allergic skin reaction. 
H336 May cause drowsiness or dizziness. 
H411 Toxic to aquatic life with long lasting effects.

Prevention

P101 If medical advice is needed, have product container or label at hand. 
P102 Keep out of reach of children. 
P103 Read label before use. 
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. 
P211 Do not spray on an open flame or other ignition source. 
P251 Do not pierce or burn, even after use. 
P405 Keep locked up.

Reaction

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Waste disposal

P501 Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.

13 from 13 Reviews

4.81 from 5 Stars


85%

15%

0%

0%

0%


Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Montag, 8. Januar 2024

Andreas H.

Alles prima und schnellgelaufen

gut

Montag, 11. September 2023

Andreas H.

Funktioniert gut, ist leicht ölig, aber gut

Funktioniert gut, ist leicht ölig, aber gut abzuwischen. Für stark klebende Rückstände braucht man viel Produkt, sodass die Dose schnell leer ist

Montag, 19. September 2022

Solvig B.

Top Produkt kann man nur empfehlen.

Klebefläche einsprühen abwischen und fertig. Super Lösungsmittel.

Montag, 29. August 2022

Peter A.

Schnell und zuverlässig

Sehr schnelle Lieferung. Produkt genau wie beschrieben. Gerne jederzeit wieder!

Mittwoch, 20. Juli 2022

Birgit

Professionelle Abwicklung, qualitativ hochwertiges Produkt!

Gern wieder!

Samstag, 9. Juli 2022

Mathias Kraus

Firma und Produkt perfekt. Sehr professioneller Eindruck

Montag, 14. März 2022

Kompetente und hilfreiche Produktberatung per Mail und schnelle Zustellung. Gerne wieder!

Gerne wieder!

Montag, 24. Januar 2022

Petra

Alles perfekt. Hat super funktioniert. Alles gelöst was zu lösen war.

Alles perfekt. Bin super zufrieden.

Donnerstag, 25. November 2021

Dieter

Einwandfreies Produkt

Von der Bestellbestätigung, Versandbestätigung und Auslieferung alles perfekt Die Lieferzeit extrem kurz. Das Produkt verwende ich hauptsächlich zum Entfernen von Etiketten und Kleberresten auf Glas. Erprobung ergab einwandfreie Resultate. Bin sehr zufrieden

Sonntag, 17. Oktober 2021

Sascha

Akzeptabel

Zuerst mal vielen Dank für die schnelle Lieferung. Das war meine erste Bestellung und es hat super geklappt.Zu nun dem Produkt: Ich habe meine Fensterrahmen von Tesafilmrückständen befreien wollen. Man kann sagen das es funktioniert, aber trotzdem ist es noch sehr aufwendig. So war es bei mir zumindest. Das Spray riecht nach frisch gepressten Limetten was einem das Gefühl das man keine giftigen Dämpfe einatmet. Ich empfehle das Spray mal weiter, da es von allen Sachen am besten wirkte.

Article no: 45222
SAP number: 60042-00000-02
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Zubehör

3M VHB cleaning cloths 150mmx150mm
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*
S-K-S 550 Cleaner Isopropanol 99.9% 1 liter
ml: 1000 ml
The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

Variants from €19.99*
€16.99*
3M Scotch-Brite Hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine
Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*
S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm
Breite in mm: 45 mm | Typ: S-K-S
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*
S-K-S 560 Lime-based industrial cleaner, clear, 500 ml
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

Customers also bought

Tesa Industrial cleaner spray 500ml colourless
The tesa 60040 cleaning spray is suitable for the quick and thorough cleaning of machine and plastic parts, tools and surfaces. It also reaches areas that are difficult to access and removes even stubborn dirt such as wax, oil, grease, rubber abrasion and silicone residue. Surfaces that have been cleaned with the spray are also optimally prepared for the application of adhesive tapes and spray adhesives. The cleaning spray evaporates without leaving any residue, leaves a pleasant odour and is the perfect choice for all craftsmen who value a clean workshop and impeccable tools.

Contents: 0.5 liter (€40.60* / 1 liter)

€20.30*
3M Special Adhesive Remover for Reactive Adhesives 425g, 38987
Effective removal of reactive adhesives 3M Special Adhesive Remover facilitates the removal of reactive adhesives from various substrates. Reactive adhesives include adhesives that require a curing agent or catalyst to form the adhesive bond. Examples of reactive adhesives include: Epoxy resins, urethanes and silicones. This adhesive remover is a solvent-based product.

Contents: 0.425 kilogram (€85.79* / 1 kilogram)

€36.46*
SIGA Rissan 60 60mmx25m
Indoors, round penetrations, such as pipes or cables, can be connected easily, quickly and securely with the single-sided adhesive high-performance tape Rissan 60.

Contents: 25 meter (€0.85* / 1 meter)

Variants from €15.37*
€21.32*
3M 6000 set 1x 3M 6200M half mask, 2x 6055 A2 filter, 2x 5925 P2R particle filter, 2x 501 filter cover
The 3M reusable half mask 6002C with its interchangeable filters is characterised by an extremely light mask body and thus enables fatigue-free working. It offers effective and comfortable protection against organic gases and vapours as well as particles. This makes the mask the ideal partner for paint brushing, paint spraying and machine sanding work. Thanks to its compact design, the mask offers an unrestricted view and can be easily combined with 3M safety goggles. Its double filter system and exhalation valve ensure reduced breathing resistance and good weight distribution. It is uncomplicated to change the filter: Thanks to its bayonet click connection, the filters can be replaced quickly and easily and the mask can be cleaned. The product complies with protection level A2P2 and fulfils the safety requirements of European standard 6200: EN 140:1998, 6055: EN 14387:2004 + A1:2008 A2, 5925: EN 143:2000 P2 R.

Variants from €47.14*
€45.83*
3M 6092 A1B1E1K1P3R+ Formaldehyde filter against organic, inorganic and acid gases, ammonia and derivatives, formaldehyde, particles
The 3M gas and combination filter 6092 has protection level A1B1E1K1P3R and offers protection against organic gases and vapours. The filter fits onto the 6000, 7000 and 7500 mask series from 3M using a bayonet click connection.

Variants from €6.46*
€16.73*
3M Safety-Walk type 1 "Universal 620" 19mmx18, 3M transparent #SW1TR19
Self-adhesive anti-slip covering consisting of anti-slip mineral grit, embedded in a tough, durable polymer and bonded with a dimensionally stable polyester film. Suitable for all smooth, wet or oily indoor and outdoor surfaces with intensive pedestrian and  light vehicle traffic in industrial, commercial and private areas (corridors, production and storage areas, ramps, stairs, ladders, treads on machines, etc.). Slip resistance according to DIN51130: R13. Fire behaviour according to EN13501-1: Bfl-s1 and according to DIN5510-2: SF3. Special widths and lengths, as well as punched parts on request.

Contents: 18.3 meter (€1.77* / 1 meter)

Variants from €30.24*
€32.33*