Tesafix 51970 12mmx50m transparent

The spacer films in the 3M 200MP adhesive series are designed in particular for the manufacture of membrane keypads and front panels, are shear-resistant (even with narrow webs), permanently elastic and highly resistant to ageing. The spacer films, which are temperature-resistant from -40°C and up to +120°C (up to +150°C for short periods), are chemically compatible with various conductive pastes and special colours and offer a high level of transparency. The spacer films do not bleed at the punched edges.

The S-757 premium reusable lightweight bonnet is a head piece for the 3M Versaflo respiratory protection system. It covers the head, face, neck and shoulders and offers eye and face protection in accordance with EN166 (protection against liquid splashes and flying particles with low impact energy). The premium reusable lightweight bonnet is characterised by its special material, which absorbs paint mist and thus reduces the risk of the paint beading off the wearer and falling onto the workpiece. The textile material is also coated on the inside to prevent paint from getting onto skin or clothing. The lightweight bonnet has a double neck seal design. The inner part of the neck seal is tucked into the top of the shirt or protective suit. This allows excess air to be channelled over the entire body, providing additional comfort. The lightweight bonnet is an extremely cost-effective solution for environments with high disposal rates: When worn, only the contaminated outer bonnet is replaced, while the headgear and air supply can continue to be used. The rigid design of the headband ensures a uniform air supply. Another plus is that it can be adjusted from the outside so that the wearer can regulate the air distribution to suit their personal comfort requirements. A simple turn of the outer knob is all it takes for the wearer to direct the airflow away from the back of the head and towards the temples, face and visor. The bracket has separate adjustment options for head height and head circumference, allowing comfortable, customised adjustment to a wide range of head shapes. The soft comfort pad can be used to further improve the fit so that the bonnet fits even more wearers perfectly. The S-757 premium reusable lightweight bonnet is available as a starter pack including head support and inner bib. Colour: white. Protection level: TH3.

3M manual pressure gun for double cartridges. Dosing of all 3M 200 ml cartridges in a mixing ratio of 1:1 or 2:1. Extremely robust metal design. With piston for even dispensing of the product.

The TR341E charger is an accessory for the 3M Versaflo TR-300 blower unit and consists of a charging cradle and power supply unit.

3M 9539 double-sided adhesive tapes with polyethylene foam carrier are equipped with a high-quality acrylate adhesive. These products are particularly recommended for applications where high initial tack, high shear strength and good ageing resistance are required. This can - within certain limits - bridge unevenness and tolerances and also has a vibration-damping effect

The TYROLIT FAST CHANGE enables very fast disc changes thanks to the Velcro fastener. The stable paper backing enables high-speed sanding on many surfaces. This product gives you a particularly even finish on lacquers, paints and composite materials. In addition, a special stearate layer reduces clogging and clogging of the disc, thereby increasing its service life.