Tesakrepp 4330 15mmx50m chamois

The Finesse-it polishing skin is used for the first polishing step. It gives the 3M polishing paste used a higher performance.

PSA version of the product 661X. Precisely graded diamond particles applied to a polyester film. Provides a consistent, repeatable surface finish on extremely hard materials. Available in many grit sizes between 0.10 and 30.0 microns.

This fibre disc was specially developed for quality-conscious end users with low consumption. It offers a fast way to remove material and work comfortably with low vibration. Based on a mixture of aluminium oxide, it can be used universally. Our range includes fibre discs in grit sizes 24 to 120.

This fibre disc was specially developed for quality-conscious end users with low consumption. It offers a fast way to remove material and work comfortably with low vibration. Based on a mixture of aluminium oxide, it can be used universally. Our range includes fibre discs in grit sizes 24 to 120.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo safety helmet M406 with hard-wearing neck and shoulder cover and polycarbonate visor, clear

Versatile double-sided: The 3M double-sided adhesive tape with polyester backing GPT-020F is transparent and 202 µm thick. It is characterised by a modified, solvent-free acrylate adhesive and is equipped with a white PP film protective cover. The 3M GPT 020F double-sided adhesive tape with polyester carrier GPT020F offers good peel and shear strength as well as high adhesive strength on numerous surfaces with high or low surface energy. It is characterised by high instant adhesion and moisture resistance. The protective polypropylene film cover ensures good handling and processability - whether manual or automated. The temperature resistance is 190 °C (hours) in the short term and up to 90 °C (days, weeks) in the long term. Possible alternative to the 3M 9088FL & 3M 9088F-200 film liner / film cover