Tyrolit A-P31 P F TFC D 150 Universally applicable, P180, mould: DISC, Art. 34230726

The Scotch-Brite Deburr and Finish PRO compact deburring and finishing disc uses precision-moulded 3M grains bonded to a nylon cloth to deliver increased performance and life for deburring and finishing applications. Our pressed compact discs are soft but as wear resistant as iron to minimise disc changes.   Use the Scotch-Brite PRO compact disc for high grinding performance and long service life in deburring and finishing work. Our smooth-running pressed compact discs remove burrs quickly and cleanly. They are soft to prevent damage, but as strong and wear-resistant as iron and therefore need to be replaced less frequently. They are manufactured with precision-moulded ceramic abrasive grains bonded to a nylon mesh. The hardness of the ceramic material in combination with the self-sharpening grain extends the service life and work can be carried out more quickly without compromising the desired smooth result or the adjustable processing with Scotch-Brite abrasive discs. The PRO compact discs for deburring and finishing are ideal for OEM and pipework renovation and maintenance. These robust high-performance grinding discs reliably remove dirt, corrosion deposits and other contaminants without stressing or impairing the thread form. This means that pipework can be put back into operation more quickly.

For heavy-duty grinding applications such as bevelling/chamfering, slag/roll scale removal, weld seam and edge finishing on a variety of metals, the 3M Silver rough grinding wheel is ideal. These abrasive discs contain our precision-formed abrasive grain, which has continuously sharp cutting edges so that it cuts through the material and does not scrape or plough through the material as with conventional abrasive grains. This results in a significantly longer service life than conventional grinding discs with ceramic grain and a consistently high removal rate over the service life. Use grinding discs together with suitable tools and accessories. Safety note: Only intended for use with tools with an approved protective cover (in accordance with DIN EN 12413 for bonded abrasives).

tesaband 4688 is a PE-extruded standard fabric tape. It consists of a 55 mesh PET/cellulose fabric and a natural rubber adhesive. tesaband 4688 is a typical repair tape that can be used in a wide range of applications and has very good processing properties.

TYROLIT spiral bands are required for fine and deburring work as well as for moulding complex workpieces. A combination of zirconium and additional coolant allows them to be used on many different materials. A wide range of available grit sizes allows you to vary between very high material removal and fine work. Simple mounting of the spiral bands on a shaft or an expandable mandrel. You will also find the accessories in our range.

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the highest demands and maximum efficiency. Excellent and constant performance, universal use and problem-free core removal. Segmented drill bits from ?˜ 47 mm with TGD technology and new segment height of 11.3 mm. Laser-welded segments up to ?˜ 250 mm for maximum safety.

tesafix 4970 is a double-sided PVC adhesive tape with acrylic adhesive. tesafix 4970 is characterised by its high adhesive strength. It offers secure adhesion even on rough surfaces and is highly resistant to plasticisers.