Tyrolit External cylindrical grinding Ceramic conventional DxDxH 500x50x203.2 For unalloyed and low-alloy steels, shape: 1, Art. 119392

Use this diamond disc to grind all carbide cutting tools for the wood and metal industry as well as various shear blades. Grinding disc sets for complete machining in diamond grit size range D64 - D46. Important: It should only be used for deep grinding. A perfect balance of grit size, concentration and bond delivers extremely long service life and profile accuracy.

Neck protection made of fabric, special accessory for 3M Speedglas high-performance welding mask G5-01. For use as neck protection if fabric is preferred or if the rigid standard protection constantly rests on the chest when welding in a downward-facing position.

The TYROLIT FAST CHANGE enables very quick disc changes thanks to the Velcro fastener. The thin paper backing makes this disc ideal for fine finishing. You get a very even finish on metals, paints, composite materials, marble and stone. This product gives you a particularly even finish on hard stone, steel and composite materials. In addition, you reduce clogging and clogging of the disc and thus increase the service life.

With the flexible fabric rollers from TYROLIT you can process almost any material. Finishing the surfaces requires preparation, either by hand or with an orbital sander. When working on wood, paint and varnish, we recommend using the BASIC fabric rollers for hand-guided sanding. We recommend using the fabric rollers on the orbital sander for finishing coatings, smoothing and cleaning composite materials and for clean intermediate sanding.

Use this diamond disc to grind all carbide cutting tools for the wood and metal industry as well as various shear blades. Grinding disc sets for complete machining in diamond grit size range D64 - D46. Important: It should only be used for deep grinding. A perfect balance of grit size, concentration and bond delivers extremely long service life and profile accuracy.

The Scotch-Brite EXL compact disc is ideal for deburring and polishing with its strong and durable bonded non-woven fibre construction. Our bonded EXL compact discs are constructed by blending abrasive and nylon fibres with synthetic resin. The nonwoven is cured and compressed for added strength and durability. Higher density EXL materials can be extremely tough and aggressively abrasive, allowing them to effectively deburr edges and corners without damaging the workpiece. Lower density materials are soft, conformable and provide a finer finish. They are ideal for finishing contoured surfaces. These sanding discs prevent smearing, giving you cleaner surfaces and reducing preparation time. They are available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a very sharp-edged, synthetic abrasive commonly used for low-pressure applications such as painting and finishing work. Aluminium oxide is a hard, blocky mineral with a high removal rate and long durability. Although silicon carbide removes faster than aluminium oxide, it produces a finer finish. Compact products are durable due to their production process. The compression and hardening of multiple layers of abrasive creates a tough and dense abrasive that can be used for heavy deburring and polishing tasks. The discs are mounted on a 114.3 mm backing pad with a 22.23 mm diameter centre hole to achieve the correct angle on the turning tools. Scotch-Brite abrasives are unique products for surface finishing. The abrasives are bonded in a non-woven fibre matrix. The combination of abrasive and non-woven material creates an abrasive system that achieves consistent results throughout the life of the product. The open non-woven structure enables cool sanding and is dust-repellent, so that the nylon fibres retain their high removal rate because they do not clog.