With the new TYROLIT SCM XC programme, TYROLIT is taking a further step towards economic efficiency. The machining time of the workpiece can be significantly reduced. A saving of 1 to 3 work steps is therefore the main argument. Thanks to the fast and high removal rate, applications such as the reduction of surface roughness, removal of temper colour, smoothing of surfaces, cleaning and removal of weld seams can be realised. Another advantage of SCM is the deburring of tool edges without additional material removal. Furthermore, the TYROLIT SCM XV programme shows the best results in terms of tool life, which in turn is proof of the cost-effectiveness of these products.
- "COARSE" grit for cleaning, derusting, removing coatings and "final finish"
- "MEDIUM" grit for light cleaning, deburring and "final finish"
- VERY FINE" grit for the final cut
- Thickness 22 mm
- Diameter 125 mm
- Premium product line
- DxH 125x22
- Specification: SCM A MEDIUM
- Shape: DISCVLSCM
- Grit size: MEDIUM
- Colour: Red
- Max. Speed: 12000 - Recommended speed: 8000-9000
- Abrasive: A - Aluminium oxide
- Open structure prevents clogging and reduces heat build-up
- Very low vibrations thanks to the integrated centring
- Extremely long service life
- Use on adjustable angle grinders
- Machinable material: aluminium, INOX, PVC, steel, gel coat, wood, composite materials
- For removing rust, paint, varnish and for repairing slightly damaged surfaces
- For finishing, matting and levelling with very low roughness
- Best suited for stainless steel and non-ferrous metals
Log in