3M Accuspray nozzle head for PPS series 2.0, 1.8 mm, transparent, 26618 (Pack=4pcs)

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each interchangeable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, reducing sanding time. Only compatible with the 3M PPS 2.0 series.

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each replaceable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray™ nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, which reduces the amount of sanding required. Only compatible with the 3M PPS 2.0 series.

The 3M PPS 2.0 Series Kits are our next generation, high performance disposable cup systems for mixing/measuring, filtering and spraying in any direction (360° spray rotation) and protecting paints when not in use.  Each lid and inner cup kit contains 50 disposable lids with integrated sleeves and full-width filters, 50 disposable inner cups, 1 reusable hard plastic outer cup and 32 caps.

The 3M Accuspray gun HG14, together with the 3M Accuspray nozzle heads and the 3M PPS cup system, optimises the filler application process in every paint shop. The nozzle heads can be replaced after each application in just three simple steps. You save yourself the hassle of cleaning the filler gun and have a virtually new device for every application. The 3M Accuspray system works with the proven HVLP technology (High Volume Low Pressure). This ensures a smooth surface and ideal layer thickness of the filler. Time-consuming sanding is thus reduced to a minimum. In addition, hardly any spray mist is produced, which noticeably reduces material consumption and is also good for your health. The 3M Accuspray gun weighs just 324 grams and has excellent ergonomics. This means that it is easy to apply filler even in hard-to-reach places and from any angle. This increases your productivity and saves material, time and costs.

The 3M Accuspray pressure cup for 0.85 litre or 0.65 litre PPS, together with the 3M Accuspray pressure cup gun HGP, enables the application of even highly viscous materials such as underbody and stone chip protection or thick-film filler from any position. You can still use the practical 3M Accuspray nozzle heads - in any of the three sizes, depending on the degree of fineness of the desired spray pattern. The gun has a pressure outlet that is connected to the cup via a hose and generates an overpressure that acts on the PPS inner cup. A valve in the cup prevents this pressure from becoming too high. As the highly viscous materials can be processed with the 200µ sieve in this way, additional filtering is created that is not possible with conventional processing methods. After use, the empty inner cups can simply be disposed of as usual, while the reusable pressure cup remains clean. Single-component materials such as stone chip protection can even be stored in the gun for several days. The PPS pressure cup can also be connected to paint spray guns from other manufacturers. This means that the advantages of the closed paint processing system can also be utilised with other gun types.

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

TYROLIT PREMIUM milling cutters are manufactured on modern CNC grinding machines. The result is a high-performance precision tool that has been specially developed for use on non-ferrous metals. With these products you achieve the best tool life and maximum durability. By choosing the right machine, the right speed and working speed as well as the right milling cutter and tooth shape, you create the basis for PREMIUM results.

The flap disc is one of the most popular grinding tools in the metalworking industry due to its ergonomics. With the 3M Cubitron II 967A flap disc, you benefit from all the advantages of this design and a sensational leap in performance thanks to the 3M precision grain.

3M 9703 is a dry transferable, double-sided adhesive film. 3M 9703 is electrically conductive in Z-axis and has good insulation in X- and Y-axis. The electrical conductivity is achieved by silver-coated nickel particles arranged in the Z-axis. These do not react in a magnetic field and are not affected in their alignment by vibration. The adhesive film connects flexible circuits with a medium distance electrically and mechanically to other flexible circuits, rigid printed circuit boards (PCB) or LCD screens. The electrically conductive film 9703 offers good adhesion to common PCB substrates such as copper, gold, FR 4 epoxy, polyimide and polyester films. Stable electrical performance in any flexible circuit interconnect application may require mechanical reinforcement (clamping).

Whether in the office or in everyday life: you should always have enough of the extra-reliable Post-it Super Sticky Notes to hand. Thanks to the special Post-it Super Sticky adhesive, the smart sticky notes have super-strong, long-lasting adhesive power - even on difficult surfaces, such as monitors, telephones, doors or shopping trolley handles. Post-it Super Sticky Notes can be removed without leaving any residue and stick again and again. Extra-strong adhesion: Thanks to the special adhesive, Post-it Super Sticky Notes adhere securely to practically all surfaces such as monitors, telephones, doors or shopping trolley handles.

The range of pressed compact discs extends from an aggressive and rigid deburring tool to a soft tool for a perfect surface finish. They are particularly suitable for hard-to-reach areas and do not change the surface geometry of the workpiece in any way when used. The main areas of application are deburring, cleaning, blending, finishing and the processing of weld seams. Compact discs offer increased safety compared to other deburring tools and a particularly cool finish.

In foundries and mould making, ceramic mounted points are often the only way to achieve improved surface results in hard-to-reach areas. PREMIUM mounted points from TYROLIT offer the longest possible service life, even for hardened steels. These tools also offer an optimum balance between clamping power and the surface finish to be achieved. Maximum working speed: 50 m/s