Product information "3M Double-sided adhesive tape with polyester backing 415, transparent, 50.8 mm x 33 m, 0.1 mm"
The double-sided adhesive tape 3M 415 is equipped with a film carrier and acrylate adhesive. The 0.1 mm thick product, which is temperature-resistant up to +65°C (+85°C for short periods), is characterised by its high instant adhesion and good shear strength. 3M 415 is designed for bonding to a wide variety of substrates such as metal, paint, most plastics, paper, cardboard, wood, glass, etc.
Properties
Thin double-sided adhesive tape with backing
Acrylic adhesive
Advantages
High immediate adhesion
Good shear strength
High adhesive strength on most surfaces
Product benefits
Long running times, e.g. due to high-speed splicing in the printing industry
Field of application
Bonding to a wide variety of substrates such as metal, paint, most plastics, paper, cardboard, wood, glass, etc.
As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.
0 from 0 Reviews
Give us a rating!
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
10670
Part number:
4155033
SAP number:
7000048399
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
The adhesive film without carrier 3M 465 is characterised by its good initial tack and high transparency and is particularly suitable for smooth surfaces. Due to its very high clarity and UV light resistance, the adhesive film is suitable for transparent backprint signs in outdoor applications.
The patented shape of the newly developed PREMIUM spiral rollers enables very easy and comfortable working without lateral deflection. By avoiding typical roller marks in the workpiece, productivity increases significantly when using PREMIUM spiral rollers, as sanding processes do not have to be carried out repeatedly. In addition, vibrations are significantly reduced and the workload is minimised. The convenient and intuitive operation requires no extensive familiarisation period, and impressive results are achieved immediately.
3M Cubitron II Netzscheiben ist eine Reihe von schnell schneidenden und langlebigen Netzscheiben, die die außergewöhnliche Schnittleistung und längere Lebensdauer eines Cubitron II Schleifmittels bieten. Sie sind so konzipiert, dass Staubabsauger ihr Bestes geben und praktisch keinen Staub auf der Arbeitsfläche oder in der Umgebung hinterlassen. Kombinieren Sie sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um das ideale Staubabscheidungssystem für Ihre Werkstatt zu schaffen.
Verbringen Sie weniger Zeit mit dem Schleifen mit 3M Cubitron II Net Discs. Unsere schnell schneidenden, langlebigen Netzscheiben verfügen über einen Netzträger und scharfe 3M Cubitron II Schleifkörner, die zusammen den bestmöglichen Schnitt liefern, ohne die Staubabscheidung zu beeinträchtigen. Sie sind für den Einsatz mit Standard-Staubabsaugsystemen ausgelegt, einschließlich tragbarer Staubabsauger, Zentralstaubsauger und Schleifmaschinen mit angeschlossenem Beutel. Sie sind in Qualitäten von 80+ bis 320+ erhältlich, um Reparaturarbeiten von der Demontage bis zur Lackierung schneller zu erledigen. Ihre lange Lebensdauer bedeutet, dass Sie weniger Schleifmittelwechsel vornehmen müssen, während ihre schnellere Schnittrate bedeutet, dass Sie weniger Zeit mit dem Schleifen verbringen. Mit den 3M Cubitron II Net Discs müssen Sie keine Leistung für die Staubabsaugung opfern. Sie müssen sich nicht mit Schleifmitteln begnügen, die sich nicht durchsetzen, wie z. B. solche, die langsam anlaufen, aber nicht lange halten, oder solche, die pro Blatt billiger sind, aber trotzdem Ihren Gewinn erhöhen. Kombinieren Sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um die ideale Staubabsauglösung für Ihre Werkstatt zu schaffen.
Sanding filler, removing paint and sanding edges - with the 3M Cubitron II Hookit Purple+ Premium sanding disc Multihole 737U. Our sanding disc with precision-formed abrasive grain and multihole perforation can also be used for final preparation before priming. It delivers outstanding sanding results, is 30 % faster than other premium abrasives and has a long service life in all steps of the repair process. The surface of the sanding disc is equipped with our precision-moulded ceramic abrasive grain. It consists of triangular-shaped abrasive grains that are electrostatically aligned. Each abrasive grain functions as an independent cutting tool that penetrates paint and filler with precision. The multihole perforation of our sanding disc ensures excellent dust extraction and thus contributes to a higher removal rate and longer service life. The 3M Cubitron II Hookit Purple+ Premium Multihole 737U sanding discs are available in grit sizes 80+ to 220+. The back of the abrasive disc features our Hookit technology. This hook and loop system was developed for work areas where discs with a self-adhesive backing can be contaminated by dust, dirt or particles in the air. Hookit sanding discs attach firmly to a velcro backing pad (sold separately) on a random orbital sander and can be removed cleanly and easily and reused throughout the life of the abrasive.
The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack
- 1x Adflo blower respirator 837730
- 1x Air hose QRS 834016
- 1x Adapter QRS 533506
- 1x Air flow meter 838020
- 1x Pre-filter 836010
- 1x spark arrester 836000
- 1x Particle filter 837010
- 1x Li-lon standard battery approx. 8 hours 837630
- 1x Belt 835000
- 1x Charger 833111
- 1x 3M Versaflo disposable lightweight bonnet S533L with integrated head holder, white, robust, crackle-free and low-lint material, additional protection for neck and shoulder area, size M/L Material: Ventflex
Variants from €903.96*
€956.32*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.