3M PPS cup 0.85 L

With the 3M Accuspray nozzle heads from the 3M Accuspray system, you can optimise the filler application process in every respect. In just three simple steps, you can replace a nozzle head on the corresponding 3M Accuspray gun and have a completely clean device in your hand in just 30 seconds. Together with the 3M PPS cup system, a material change is possible within a very short time and time-consuming cleaning of the filler gun is a thing of the past. So every application feels like using a brand new spray gun. Thanks to the optimised spray jet of the nozzle heads and the gun's modern HVLP technology, you achieve a smooth filler surface, an ideal layer thickness and significantly less spray mist during application. Your immediate benefit from this is a considerable reduction in the amount of work required, as the sanding time required in the subsequent process is minimised. You also reduce material consumption and your health risks. The 3M Accuspray nozzle heads are available in three different diameters: 1.4 millimetres (orange), 1.8 millimetres (white) and 2.0 millimetres (red). In combination with the 3M Accuspray HGP pressure cup gun, all nozzles are also suitable for highly viscous materials.

The 3M Accuspray gun HG14, together with the 3M Accuspray nozzle heads and the 3M PPS cup system, optimises the filler application process in every paint shop. The nozzle heads can be replaced after each application in just three simple steps. You save yourself the hassle of cleaning the filler gun and have a virtually new device for every application. The 3M Accuspray system works with the proven HVLP technology (High Volume Low Pressure). This ensures a smooth surface and ideal layer thickness of the filler. Time-consuming sanding is thus reduced to a minimum. In addition, hardly any spray mist is produced, which noticeably reduces material consumption and is also good for your health. The 3M Accuspray gun weighs just 324 grams and has excellent ergonomics. This means that it is easy to apply filler even in hard-to-reach places and from any angle. This increases your productivity and saves material, time and costs.

The 3M PPS kits with lids and inner cups (first version not compatible with 3M PPS series 2.0 items) each contain 50 (or 75) disposable lids, 50 inner cups and 24 caps specifically for use with the 3M PPS paint application system. Each 3M PPS lid has an integrated filter that ensures optimum filtration of the paint during application. Choose from lids with 125 µ filters, often recommended for waterborne paints, or 200 µ filters for traditional solvent-based paints. Always consult your paint manufacturer to use the recommended filter for the specific paint.

3M 5451 and 5453 are PTFE-coated glass fibre adhesive tapes with a resilient silicone adhesive. These adhesive tapes have very good sliding properties, a very good non-stick effect and a high thermal and mechanical load capacity. Adhesive tape for coating plastic film welding equipment and as a sliding coating with high mechanical strength and an adhesive-repellent surface.

The 3M HDT-AN heat-shrinkable tubing is a thick-walled, halogen-free heat-shrinkable tubing made from modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and earth cables for indoor, outdoor and underground installations. It is used to insulate and seal all types of connections, especially as an outer conduit for control cable fittings. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat-shrink tubing is UV-resistant and resistant to many chemical influences. Its shrink ratio is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing. It is not self-extinguishing.

3M Cubitron II Netzscheiben ist eine Reihe von schnell schneidenden und langlebigen Netzscheiben, die die außergewöhnliche Schnittleistung und längere Lebensdauer eines Cubitron II Schleifmittels bieten. Sie sind so konzipiert, dass Staubabsauger ihr Bestes geben und praktisch keinen Staub auf der Arbeitsfläche oder in der Umgebung hinterlassen. Kombinieren Sie sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um das ideale Staubabscheidungssystem für Ihre Werkstatt zu schaffen.   Verbringen Sie weniger Zeit mit dem Schleifen mit 3M Cubitron II Net Discs. Unsere schnell schneidenden, langlebigen Netzscheiben verfügen über einen Netzträger und scharfe 3M Cubitron II Schleifkörner, die zusammen den bestmöglichen Schnitt liefern, ohne die Staubabscheidung zu beeinträchtigen. Sie sind für den Einsatz mit Standard-Staubabsaugsystemen ausgelegt, einschließlich tragbarer Staubabsauger, Zentralstaubsauger und Schleifmaschinen mit angeschlossenem Beutel. Sie sind in Qualitäten von 80+ bis 320+ erhältlich, um Reparaturarbeiten von der Demontage bis zur Lackierung schneller zu erledigen. Ihre lange Lebensdauer bedeutet, dass Sie weniger Schleifmittelwechsel vornehmen müssen, während ihre schnellere Schnittrate bedeutet, dass Sie weniger Zeit mit dem Schleifen verbringen. Mit den 3M Cubitron II Net Discs müssen Sie keine Leistung für die Staubabsaugung opfern. Sie müssen sich nicht mit Schleifmitteln begnügen, die sich nicht durchsetzen, wie z. B. solche, die langsam anlaufen, aber nicht lange halten, oder solche, die pro Blatt billiger sind, aber trotzdem Ihren Gewinn erhöhen. Kombinieren Sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um die ideale Staubabsauglösung für Ihre Werkstatt zu schaffen.

The 3M safety spectacles 2895S are classic full-vision goggles that are characterised by their slim and comfortable fit. The green IR 5.0 lenses made of polycarbonate with anti-scratch coating offer reliable protection with optimum vision. This model variant without ventilation slits is gas-tight. The wide, comfortably adjustable headband, the adjustable joints and the side grooves, which allow them to be worn over prescription glasses, ensure a high level of comfort. These full-vision goggles have an anti-fog coating and a green IR tint of 5.0. They filter UV and IR radiation as well as visible light, making them ideal for use during gas welding or soldering. Lens marking: 2C-1.2 3M 1 B K N

The transparent line allows you to apply elastic bumpers invisibly to glass, Plexiglas or coloured surfaces (wood, plastic, metal) without affecting the colour fastness or yellowing. Standard shapes: round, square, rectangular.

3M 5451 and 5453 are PTFE-coated glass fibre adhesive tapes with a resilient silicone adhesive. These adhesive tapes have very good sliding properties, a very good non-stick effect and a high thermal and mechanical load capacity. Adhesive tape for coating plastic film welding equipment and as a sliding coating with high mechanical strength and an adhesive-repellent surface.