3M 5453 PTFE glass adhesive tape 19.1mmx33m, 0.22mm, silicone

Processing of profiles and hard-to-reach areas. Sanding of edges, rebates and surfaces, suitable for dry and wet sanding.

The 3M HDT-A heat-shrinkable tubing is a thick-walled heat-shrinkable tubing made from modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and earth cables for both outdoor and underground installations. It is used to insulate and seal all types of connections, especially as an outer conduit for control cable fittings. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat-shrink tubing is UV-resistant and resistant to many chemical influences. Its shrink ratio is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is self-extinguishing and complies with the Lloyds Register of Shipping MIL-I-23053/15 test standard.

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

In foundries and mould making, ceramic mounted points are often the only way to achieve improved surface results in hard-to-reach areas. PREMIUM mounted points from TYROLIT offer the longest possible service life, even for hardened steels. These tools also offer an optimum balance between clamping power and the surface finish to be achieved. Maximum working speed: 50 m/s

The Scotch-Brite EXL pressed compact disc XL-UW is a pressed fibre fleece material that combines the best finishing properties with aggressiveness and a long service life. Thanks to its spring effect and flexibility, the material adapts ideally to any workpiece, does not change the geometry of the workpiece and also ensures reduced vibrations and improved user ergonomics during the application process.

The 3M HDT-A heat-shrinkable tubing is a thick-walled heat-shrinkable tubing made from modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and earth cables for both outdoor and underground installations. It is used to insulate and seal all types of connections, especially as an outer conduit for control cable fittings. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat-shrink tubing is UV-resistant and resistant to many chemical influences. Its shrink ratio is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is self-extinguishing and complies with the Lloyds Register of Shipping MIL-I-23053/15 test standard.