3M Roloc Grinding disc 361F, 25.4 mm, P36

Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.

This product family is compatible with ribbon cables or round/flat cables with conductor spacing of 1.27 mm. The proven insulation displacement contacts are designed for solid and stranded conductors for increased design freedom in circuit and system development. Stranded conductors with conductor cross-sections of AWG 26 (0.141mm²) and AWG 28 (0.089mm²) or solid conductors with AWG 26 (0.128mm²) or AWG 28 (0.08mm²) can be processed. The contacts in the mating area have a gold coating for optimum electrical performance. The adhesive strips in the cover of the connectors are a valuable aid for manual processing. The cover is positioned at the intended location on the cable and adheres there thanks to the adhesive strip. The connector body is latched into the cover from below and the cover, cable and body are pressed together using a tool. Sturdy metal hooks ensure a secure connection between the plug components and the cable. A plastic lug on the outer housing wall serves as a centre coding. It fits exactly into the recess of the mating connector on the circuit board, preventing incorrect mating and possible damage to the circuit or system. The female connectors are compatible with the 3M 3000 and 2500 series receptacle plugs  for PCB mounting. The 3M 3365, 3659 and 3759 series cables are suitable for cable assembly and the products are of course UL listed.

Build the right brush for your individual needs. With the radial single segments, you get the proven Scotch-Brite Bristle technology of the Cubitron ceramic abrasive grain encapsulated in solid plastic and achieve consistent work results over the entire service life. With their curved bristles (type C), the RB-ZB single segments belong to the most flexible Scotch-Brite Bristle variant. They are ideal for cleaning and light deburring applications in hard-to-reach work areas, especially as they are also available in smaller diameters. With the MN-AC mandrel, the individual segments are combined (1 segment=approx. 1.6 mm wide).

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

tesaprint 52307 is specially designed for bonding thin photopolymer clichés (0.76 mm and 1.14 mm) to compressible coated sleeves / cylinders. It is a double-sided adhesive tape with very different adhesive strength values on both sides and a smooth silicone paper cover. tesaprint 52307 remains on the compressible base when the thin cliché is removed and can then be removed without leaving any residue. The low adhesive strength on the covered side ensures easy and problem-free removal of the cliché. Due to the various compressible coatings available on the market (rubber, foam, PU), it is advisable to carry out your own adhesion tests with tesaprint 52307.

TYROLIT offers you a wide range of tools matched to various grinding machines and tooth pitches. These are suitable for dry and wet grinding for HSS, CV and stellited saws. The products are available in different edge profiles Form 1, 1F, 1C in the diameter range from 150 - 350 mm.