3M Scotch-Weld 2-component acrylate-based construction adhesive for the EPX system DP 8705 NS, black, 45 ml

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 45ml cartridges through the chemical reaction of both components.

The 3M Scotch-Weld Flexible Acrylic Adhesive DP8610NS is a black, non-flowing and low-odour 2-part acrylic adhesive. This high elongation, structural strength acrylic adhesive is ideal for bonding dissimilar materials, joining thin panels where an invisible bond is required and any other application requiring flexible bonds. This unique structural adhesive combines the fast cure and minimal surface preparation of an acrylic adhesive with the typical high flexibility and elongation of urethanes or sealants.

3M Scotch-Weld DP6310NS (non-sag) is a solvent-free and non-flowing 2-component polyurethane-based construction adhesive with a working time of 9 minutes. The flexible product with a 1:1 mixing ratio is characterised by high tensile shear strength and compensation for high thermal expansion and is suitable for high-strength bonding of fibre composites such as CFRP, GFRP, SMC etc. and metals such as aluminium and stainless steel. Plastics such as ABS, PC, etc. can also be bonded to each other and to other materials.

The hand-held processing device for EPX was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 1:1 / 2:1 / 10:1 feed piston.

Dream, Design, Deliver - with the 3M VHB adhesive tape LSE-110WF. A 1.1 mm thick, conformable, high-performance double-sided adhesive tape in white made from modified acrylic adhesive. It can replace rivets, welds, screws and other mechanical joining methods. The LSE series of 3M VHB adhesive tapes is suitable for low surface energy (LSE) bonding and delivers lasting results even where other adhesive solutions require special surface treatment. It offers high adhesion performance without an adhesion promoter for difficult-to-bond materials such as PP, TPO, TPE and composite materials. By eliminating the priming process step, the LSE series increases productivity and reduces the use of hazardous chemicals in your manufacturing facilities. The excellent durability and broad temperature resistance ensure outstanding strength and reliability for indoor and outdoor applications. The tape enables quick, easy and durable bonding with high strength. With its viscoelasticity, it offers flexibility in design. Its thermal expansion properties make it ideal for bonding different materials.

3M Scotch-Weld DP 604 NS is a flexible 2-component construction adhesive based on polyurethane with a 1:1 mixing ratio. DP 604 NS is used for fast and flexible bonding of metals and plastics, rubber, concrete, ceramics, wood, etc. Robust and with a very short working time 3M Scotch-Weld DP 604 NS is a flexible 2-component construction adhesive based on polyurethane. DP 604 is characterised by its flexibility and good impact resistance under dynamic loads. DP 604 NS does not flow and is also suitable for vertical applications. Used for bonding various plastics, metals such as aluminium and steel, concrete, ceramics, wood, etc. Processing time at room temperature 4 minutes - hand strength after 20 minutes Dosing - mixing - application with the EPX hand applicator Possible applications can be used in many material combinations General applications in industry Bonding of wooden or metal door thresholds to concrete Bonding of wooden or aluminium door frames with other materialsbonding wooden or aluminium door frames to other metals Bonding panelling to wood or plaster Bonding aluminium panels to glass Protection against corrosion Sealing textile water hoses Information on polyurethane adhesives Polyurethane adhesives are relatively flexible after curing and compensate for high thermal expansion. 2-component polyurethane-based construction adhesives consist of monomers that have to be mixed. The isocyanate reacts with the polyol in the static mixer. Both components cure faster and more homogeneously than moisture-curing 1-component PUR hotmelt adhesives. Glass on metals, metals with plastics, plastics on wood: polyurethane adhesives are also suitable for high-strength bonding of such diverse joining partners as CFRP and GFRP, rubber, leather, tiles and concrete. Due to their chemical composition, polyurethane adhesives have a wide range of properties. Each formulation results in different density, flexibility or hardness.