3M Scotch-Weld 2-component polyurethane-based construction adhesive for the EPX System DP 604 NS, black, 48.5 ml
Ready for immediate dispatch, delivery time approx. 1 - 3 working days
3M Scotch-Weld DP 604 NS is a flexible 2-component construction adhesive based on polyurethane with a 1:1 mixing ratio. DP 604 NS is used for fast and flexible bonding of metals and plastics, rubber, concrete, ceramics, wood, etc. Robust and with a very short working time 3M Scotch-Weld DP 604 NS is a flexible 2-component construction adhesive based on polyurethane. DP 604 is characterised by its flexibility and good impact resistance under dynamic loads. DP 604 NS does not flow and is also suitable for vertical applications. Used for bonding various plastics, metals such as aluminium and steel, concrete, ceramics, wood, etc. Processing time at room temperature 4 minutes - hand strength after 20 minutes Dosing - mixing - application with the EPX hand applicator Possible applications can be used in many material combinations General applications in industry Bonding of wooden or metal door thresholds to concrete Bonding of wooden or aluminium door frames with other materialsbonding wooden or aluminium door frames to other metals Bonding panelling to wood or plaster Bonding aluminium panels to glass Protection against corrosion Sealing textile water hoses Information on polyurethane adhesives Polyurethane adhesives are relatively flexible after curing and compensate for high thermal expansion. 2-component polyurethane-based construction adhesives consist of monomers that have to be mixed. The isocyanate reacts with the polyol in the static mixer. Both components cure faster and more homogeneously than moisture-curing 1-component PUR hotmelt adhesives. Glass on metals, metals with plastics, plastics on wood: polyurethane adhesives are also suitable for high-strength bonding of such diverse joining partners as CFRP and GFRP, rubber, leather, tiles and concrete. Due to their chemical composition, polyurethane adhesives have a wide range of properties. Each formulation results in different density, flexibility or hardness.
- Cures at room temperature after 6 hours
- remains stable after application
- Working time at room temperature 4 minutes - Hand strength after 20 minutes
- Mixing ratio 1:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- suitable for high-strength bonding of a wide range of materials
- Pasty (not flowing)
- no running of the construction adhesive into unwanted areas
- High temperature resistance up to 120°C
- Bonding of metals and plastics, rubber, concrete, ceramics, wood, etc.
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.
P261A Avoid breathing vapour.
P280E Wear protective gloves.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P342+ P311 If respiratory symptoms occur: Call a POISON CENTRE or doctor.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
Log in