3M Scotch-Weld Reactive Polyurethane Hotmelt Adhesive TS 230, White, 2 kg

Removal of light surface soiling and tarnishing, polishing (industrial polish), especially for stainless steel, radial use, use on straight grinder or flexible shaft.

The S-K-S 197 is a PE-coated fabric adhesive tape with a very high initial adhesion. The adhesive tape is highly tear-resistant. SKS 197 has a matt surface to avoid light reflection. It is waterproof, adheres very well to rough and uneven surfaces and is easy to tear off by hand.

Internal brushes with abrasive grit are particularly suitable for deburring bores or O-ring grooves. This tool can also be used for polishing or cleaning complex workpieces such as nozzles. Clamping in the drill is only possible if the maximum permissible speed is observed. The brush must be clamped at least 10 mm and turned clockwise. They are made of galvanised twisted wire and a simple fill spiral and are therefore easy to handle. The abrasive bristles are also effective on the sides, allowing edge rounding to be achieved at bore transitions.

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M207 with flame-retardant face seal and polycarbonate visor, clear

This fast curing epoxy tin replacement filler is suitable for repairing surface damage (such as dents) on metal parts, reshaping surfaces and completely sealing welds (to protect them from corrosion). The 3M Epoxy Tin Replacement Filler has a unique formulation, is lead-free and contains 100% solids so it does not shrink during curing. It has excellent adhesion and anti-corrosion properties. With a working time of approx. 15 to 20 minutes and a curing time of approx. 4 hours at 22 °C, 3M Epoxy Tin Filler enables fast processes in the bodyshop. Curing can be further accelerated by IR drying. The classic open flame tinning process still used today is easily replaced by the use of 3M Epoxy Tin Filler. This makes it possible to avoid high temperatures in the process, which is particularly relevant for certain modern vehicle materials such as high-strength thin steels, composites, etc. There is no need to handle open flames or remove heat-sensitive vehicle parts, as room temperature is sufficient for processing and curing the products. After curing, the material can be sanded without any problems and then painted as normal. Follow the paint manufacturer's instructions.