3M Sprayable seam sealant, MS-Fugenflex, gray, 290 ml

€44.85* % €0.00* (0.00% saved)

Unit price: €44.85* % €0.00*

Unit price (net): €37.69 % €0.00

Contents: 0.29 liter (€154.66* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Note Delivery cannot be made to private individuals. Delivery may only be made to resellers, professional users or public research, testing or teaching institutions if we have complied with the attached Chemicals Prohibition Ordinance completely filled out and signed by you.

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Sprayable seam sealant, MS-Fugenflex, gray, 290 ml"

The 3M sprayable seam sealant enables the exact reproduction of OEM structures in the engine compartment, on the floor panel and for overlapping connecting seams. The light grey one-component material made from modified silanes (MS) cures in the presence of humidity, but always remains flexible. At the same time, the low solvent content ensures that it does not shrink. It can be painted over wet-on-wet immediately after application. The silicone and isocyanate-free sealant does not form threads or spray mist and does not sag, even on vertical surfaces, so that you can easily and safely achieve a very good result. The high final strength and temperature resistance guarantee lasting durability.

Properties

1-component silyl polymer (modified silanes)
Curing through air humidity
Good temperature resistance
Light grey
Without isocyanates and silicones

Advantages

Very low solvent content
No spray mist
No thread formation
Can be painted over wet-on-wet
High material flexibility

Product benefits

No sagging on vertical surfaces
No shrinkage

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Flamme

Ausrufezeichen

Gesundheitsgefahr

Umwelt

Hazard statement / CLP

H226 Flammable liquid and vapour.
H317 May cause an allergic skin reaction.
H360D May damage the unborn child.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280E Wear protective gloves.
P273 Avoid release to the environment.

Reaction

P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P370+ P378G In case of fire: Use extinguishing media for flammable liquids, such as dry chemical or carbon dioxide to extinguish.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 13690

Part number: 08851

SAP number: 7000033759

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M Scotch-Brite Hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

Customers also bought

3M Primer, for ceramic glass edges, bare areas (steel, aluminium) or blank glass (untinted or tinted), 30 ml, black #58012

The 3M Primer optimally prepares smooth surfaces for the application of adhesives and sealants so that they adhere much more strongly and securely. It is transparent and consists of a one-component polyurethane. Thanks to its permanent elasticity, high temperature resistance and resistance to water and weak acids and alkalis, it is particularly suitable for bonding front, rear and side windows with PU or PVC-encapsulated glass edging, pre-primed glass edging, ceramic glass edging with a PU layer applied at the factory or for painted surfaces. It is completely dry after 15 minutes, but can be painted over as soon as the skin has formed, ensuring a smooth process flow.

Contents: 0.03 liter (€468.33* / 1 liter)

Variants from €1.09*

€14.05*

3M Spreadable sealant, grey, 1 l, 08537

The 3M brush-on sealant enables easy application to a variety of surfaces. It can be used on metal as well as on primed or painted parts. The viscous compound is easy to brush on and remains permanently elastic even after drying. The original brush stroke is retained. The sealant forms a skin layer after just five minutes and can be painted over after just thirty minutes. The rubber-based sealant is extremely resistant to water, oil and petrol and is therefore characterised by long-lasting functionality.

€42.15*

3M Adhesive and sealant l Polyurethane-based windscreen adhesive 590, black, 310 ml

3M 590 Polyurethane Adhesive and Sealant is high modulus with fast curing and can be used on plastics such as PMMA and PC as well as on glass. The product has a skin formation time of 30 minutes and can be painted over afterwards. 3M 590 is a polyurethane adhesive and was developed especially for bonding windows in vehicle construction and for bonding glass with a ceramic coating.

€11.89*