3M Stikit Self-adhesive disc 426U, A-paper backing, 150 mm, P240, unpunched, 175 pieces per roll

The G3000 model was developed in close co-operation with the forestry sector and industry. Designed for tough working conditions and the highest protection requirements, it offers the best possible ventilation and optimum visibility.

3M 255P is a universal sanding tool that is very well suited for all wood sanding applications by hand or with an orbital sander thanks to its flexible C-paper backing. Its special coating also makes it ideal for sanding lacquer in fine grits without the sandpaper clogging too early. It can be used both by hand and on machines.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M207 with flame-retardant face seal and polycarbonate visor, clear

TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters.