Verarbeitungsgeräte
Not sure what you need? We can help you find the right product for your requirements.
To the product selection guideFilters
Filter products
–
4 Article
Manual applicator for VHB very high bond tapes as well as for a variety of PE / PU foam tapes, single-sided tapes, filament and transfer tapes (without liner removal device). It enables precise and fast application of the adhesive tapes as well as high process stability thanks to the optimum contact pressure. The integrated cutting device cuts the adhesive tapes cleanly to the required length. The adhesive tape thickness to be processed is 0.25 - 1.5 mm, the roll width to be processed is 4 - 20 mm.
Typ:
MR1
Manual press-on system with spring-loaded and secured roller, which is unlocked when the set contact pressure is reached. A reproducible minimum contact pressure (basic setting=50 N/cm²) is guaranteed by the defined pressure transmission with the MR1 pressure roller. This allows attachments to be pressed on reproducibly and reliably and ensures sufficient wetting of the adhesive tape to the substrate.
Functional description: 1. the 3M manual pressure roller is inserted with the handle side into the holder and fixed by a clamp connection. 2. a hand crank is used to move the counter roller with the force measuring device onto the pressure roller until both rollers can be twisted. (Alternatively, the length measuring unit can also be adjusted to a fixed dimension). 3. The required force can then be read on the digital display of the pressure force gauge.
Manual pressure system with spring-loaded and secured roller, which is unlocked when the set contact pressure is reached. This allows attachments to be pressed on reproducibly and reliably and ensures sufficient wetting of the adhesive tape to the substrate.
Typ:
MR3
Manual pressure system with spring-loaded and secured roller, which is unlocked when the set contact pressure is reached. A reproducible minimum contact pressure (basic setting=80 N/cm²) is guaranteed by the defined pressure transmission with the MR3 pressure roller. This allows attachments to be pressed on reproducibly and reliably and ensures sufficient wetting of the adhesive tape to the substrate.
Functional description: 1. the 3M manual pressure roller is inserted into the holder with the handle side and fixed in place with a clamp connection. 2. a hand crank is used to move the counter roller with the force measuring device onto the pressure roller until both rollers can be twisted. (Alternatively, the length measuring unit can also be adjusted to a fixed dimension). 3. The required force can then be read on the digital display of the pressure force gauge.
Variants from €1,800.49*