Tesakrepp 4330 38mmx50m chamois

Thanks to their flexibility, these tools adapt perfectly to any workpiece contour. The radially arranged flaps of the flap points can be used on different materials and allow precise work for different applications such as matting, pre-polishing and cleaning surfaces. The highly flexible flaps also make it easy to work on hard-to-reach areas.

3M Temflex adhesive tape 155 is your economical solution for essential, everyday tasks such as labelling, insulating and bundling conductors under ambient conditions. Ideal for general, everyday insulating tape needs. 3M Temflex 155 insulating tape is a cost-effective, all-purpose vinyl insulating tape. It is highly resistant to moisture and changing weather conditions. It is made of polyvinyl chloride (PVC), which is flame retardant. 3M Temflex 155 tape offers good mechanical protection with minimal bulk and is Type 1 classified according to IEC 60454-3-1-1/F-PVCP/60. Temflex 155 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.13 mm thick, tested in accordance with UL standard 510 and labelled as "flame retardant". The tape can be used at temperatures from 0 °C to 38 °C without impairing its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

The 3M precision-moulded ceramic grain contributes significantly to the performance of this disc. The grain tips of the triangular discs break during the sanding process, leaving sharp cutting edges at all times. The surface of the material is therefore continuously cleanly processed. The result is fast, cool sanding and an extended service life of the abrasive. This abrasive paper is a sanding tool for coarse and fine sanding of all types of wood, stainless steel sheets and leather. The semi-open coating prevents premature clogging of the sanding tool.

The 3M Peltor safety helmet G3000 with 3M Uvicator sensor was developed in close cooperation with industry and forestry and fulfils the highest protection requirements. The G30DUV model made of UV-stabilised ABS plastic is neon green and equipped with a headband with a pinnlock fastening system and sweat leather. Unlike conventional helmets with ventilation, the G3000 has significantly more ventilation slots. This maximum permissible ventilation area on the top of the helmet shell ensures an exceptionally high level of wearing comfort, even during physically strenuous work in warm environments. The extra short peak ensures optimum visibility. The slim, round shape reduces the risk of getting caught on branches, for example. The Peltor G3000 safety helmet also offers an advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Thanks to the special profile design, it is also easy to attach ear muffs or visors. Particularly practical: the patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The three-point fastening option of a chin strap (optionally available as an accessory) ensures customisation to the shape of the head and a perfect fit. The high-quality sweat leather is easy to replace if necessary and ensures maximum hygiene. The 3M Peltor safety helmet G3000 with 3M Uvicator can be used in forestry, industry and construction. The helmet is suitable for head widths from 54 - 62 cm.

TYROLIT vacuum-brazed diamond core bit for all ceramic tiles, porcelain stoneware and marble slabs. Maximum drilling comfort, universally applicable. Perfect, chipping-free drilling in tile and sanitary areas.