TYROLIT grinding wheel DxH 115x22.23 TOUCH for stainless steel and non-ferrous metals, shape: 29T - offset version, Art. 236318

tesa Filament 53398 is an extremely tear-resistant monodirectional glass fibre reinforced filament adhesive tape with a PET carrier material and a tensile strength of up to 800 N/cm. tesa Filament 53398 is equipped with a synthetic rubber compound that is characterised by a high instant tack and good shear strength values. The adhesive system is also highly resistant to ageing and can be removed from various surfaces without leaving any residue.

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters. Colour: yellow. Roll dimensions: 50 mm x 33 m.

Vitrified bonded grinding discs are mainly used in workshops and repair shops. They are particularly versatile for grinding and sharpening various components. The harmonised specifications enable a wide range of applications from coarse to fine grinding. These discs are supplied in retailer-friendly packaging for space-saving storage. A reduction ring set is already included in the packaging and can also be reordered.

The microfinishing film on a 3-mil backing with aluminium oxide abrasive grain is available in grit sizes from 9 to 100 microns. The disc is equipped with a dust-repellent coating - FreCut - which significantly increases the service life. The back of the disc has a Velcro fastening for quick tool changes.

The 3M Scotchlok connector is suitable for connecting solid or stranded conductors in installation wiring technology. With a cross-section range of 0.5 to 1.5 square millimetres, it enables a through-connection even on uncut conductors. The black Scotchlok connector can withstand a maximum voltage of 30 volts and a maximum temperature of 105 °C. It can be used in control, measurement and regulation applications as well as in automotive electrics and switchgear construction. Its function is based on the principle of a U-element: the conductors to be connected are fed into the connector without having to be stripped beforehand. By applying light pressure with the Scotchlok pliers, the U-elements remove the wire insulation, increase the contact surface and establish contact with the conductor. The spring-loaded U-element encloses the individual conductors and ensures a mechanically strong, vibration-proof, electrically perfect and permanent connection. The connector has been tested in the high-voltage test field of 3M Deutschland GmbH in accordance with VDE 0606, 0607, 0303, 0470 and IEC23F and has fulfilled all conditions. The Scotchlok connectors are all UL and C.S.A. listed.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x air flow indicator TR-971