Variants
The green 3MEMS iD-Full Range Marker - Wastewater makes marking and therefore later locating underground wastewater pipes extremely easy. It can be located and read up to a maximum depth of two metres in the ground, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for all types of soil. Due to its diameter of 38.1 centimetres at a height of 1.65 centimetres and its horizontal installation position, it also serves as a "protective shield" for sleeve bodies, among other things. The electronic markers are regarded as the most reliable method of marking existing or new installations - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage power lines. The EMS iD markers are supplied with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly onto the cable/location plan. If the iD marker receives the "Read"-Signal from a 3M Dynatel cable locator, it transmits the information previously stored in it. The iD markers can be temporarily or permanently programmed to store user-defined information such as cable or joint data, type of application or other important details. Once this data has been read by the locator, it can be transferred to a PC via an RS232 serial connection. These active iD full range markers are also compatible with older, passive markers.
- Suitable for deeper applications
- horizontal installation position
- Suitable as a "protective shield" for socket bodies
- Diameter of 38.1 cm
- With iD function
- Colour complies with APWA standards
Log in