Product information "3M 1873V+ Aura respirator FFP3 with cool-flow exhalation valve, up to 30 times the limit value (hygienically individually packaged)"
The 3M Aura two-way respirator is a particle-filtering half mask that complies with the European standard EN 149:2001+A1:2009 and is specially designed for use where there is an increased risk of infection or respiratory hazards. Thanks to the 3M Cool Flow exhalation valve, the mask is extremely comfortable to wear.
Properties
Advanced design and latest filter technology
Wearing comfort and tight fit due to special design of the nose region
Innovative chin strap
Exhalation valve allows respiratory heat and moisture to escape
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
23796
Part number:
M1873V+
SAP number:
7000088719
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
The 3M Fit Test FT10 is a control accessory for 3M half masks that can be used to carry out a taste test to check the fit of particle-filtering half masks and half masks with particle or combination filters. The test kit contains a bonnet with a cuff, which the test person wears without respiratory protection in the first round. The sweet-tasting sensitivity test solution is then sprayed into the bonnet using a nebuliser. The amount required for the test person to taste the solution when inhaling is the indicator for the test amount for the second run. Here, the test person wears the respiratory protection to be tested under the bonnet. After a few movement and breathing exercises that simulate realistic use of the mask, the fit test solution is sprayed into the bonnet. If the test person tastes nothing, the mask fits tightly and provides reliable protection. However, if the taste test is positive and this is also the case during a control run, the mask is unsuitable for the shape of the test person's face.
The 3M Fit Test FT30 is a control accessory for 3M half masks that can be used to carry out a taste test to check the fit of particle-filtering half masks and half masks with particle or combination filters. The test kit contains a bonnet with a cuff, which the test person wears without respiratory protection in the first round. The sweet-tasting sensitivity test solution is then sprayed into the bonnet using a nebuliser. The amount required for the test person to taste the solution when inhaling is the indicator for the test amount for the second run. Here, the test person wears the respiratory protection to be tested under the bonnet. After a few movement and breathing exercises that simulate realistic use of the mask, the fit test solution is sprayed into the bonnet. If the test person tastes nothing, the mask fits tightly and provides reliable protection. However, if the taste test is positive and this is also the case during a control run, the mask is unsuitable for the shape of the test person's face.
The 3M Aura respirator 9330+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses. The new filter technology ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 63% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap makes it easy to position the mask, ensuring a good fit and a secure seal. The 3M Aura respirator 9330+ is hygienically individually packaged and has protection level FFP3 NR D. The application limit is 30 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.
3M Aura respirators provide effective respiratory protection in medical facilities where healthcare professionals are exposed to dusts, non-volatile liquid particles and biological aerosols. This respirator reduces the transmission of infectious agents from staff to patients and is suitable for use during surgical and other medical procedures. This product also provides protection against splashes.
The 3M Aura 9322+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses - especially in combination with its 3M Cool Flow exhalation valve. This valve increases wearing comfort, especially in hot and humid environments, as it allows respiratory heat and moisture to escape easily. The new filter technology also ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 68% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap allows the mask to be easily positioned, ensuring a good fit and a secure seal. The 3M Aura respirator 9322+ is hygienically individually packaged and has protection level FFP2 NR D. The application limit is 10 times the limit value for particles. It is used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.
The 3M Aura 9320+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses. The new filter technology ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 68% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap allows the mask to be easily positioned, ensuring a good fit and a secure seal. The 3M Aura respirator 9320+ is hygienically individually packaged and has protection level FFP2 NR D. The application limit is 10 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.
EAN single pack: 4046719487325
EAN bulk pack: 4046719487332
<strong>We receive the masks from 3M as so-called "bulk goods" with approx. 440 pieces in a box. We as SKS repack the goods to your ordered quantity in neutral boxes. You will therefore receive the 3M 9320+ hygienically individually packed but not in the original 3M carton. Masks with sub-packaging of 10/12 or 20 pieces can no longer be supplied by 3M for over 1 year.
A pack of 20 contains 20 individually packed masks.
The new fibre discs from TYROLIT guarantee maximum aggressiveness, an unassailable service life and maximum comfort when machining steel and stainless steel. This is made possible by the self-sharpening ceramic grain in combination with an innovative bond. The combination of blue-fired ceramic grit and our unique bond system guarantees lasting aggressiveness and an unimpeachable service life. The CERABOND X fibre disc is the best choice for fast and comfortable work on steel and stainless steel. With Cerabond X you can reach your goal faster - both when surface grinding and when removing weld seams as well as when derusting or deburring.
€1.05*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.