Variants
The 3M 1K PU windscreen adhesive is a highly viscous, permanently elastic adhesive that hardens with air humidity. It is suitable for the immediate installation of front, rear and side windows. It is both FMVSS-212 and FMVSS-216 approved and guarantees a safe workshop dwell time of four hours without airbags or eight hours with double airbags. The applied black bead is up to 15 millimetres thick and can be painted over after the skin has formed. With a temperature resistance of -40 °C to +90 °C (even up to 120 °C for short periods) and resistance to water, light acids and alkalis, the 3M 1K PU windscreen adhesive can withstand the most extreme conditions.
- Application temperature from +5 °C to 35 °C
- Curing due to air humidity
- Resistant to water, weak acids and alkalis
- Permanently elastic
- Ready to drive (at +23 °C and 55 % humidity): 4 hours without airbag, 8 hours with airbag
- FMVSS-212 and FMVSS-216 tested
- Thickness of the applied black bead: up to 15 mm
- Temperature resistant from -40 °C to +90 °C, briefly +120 °C
- Can be painted over after skin formation
- Time saving
- No sagging or slipping
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H412 Harmful to aquatic life with long lasting effects.
P261A Avoid breathing vapour.
P284A Wear respiratory protection if ventilation is inadequate.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P342+ P311 If respiratory symptoms occur: Call a POISON CENTRE or doctor.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in