3M 4545 Protective coverall, white, TYPE 5/6, size 4XL, material PE laminate, antistatic coating, particularly low-linting, detachable zip, knitted cuffs

Support carrier for Cubitron II fibre discs, optimum power transmission and increased sanding performance.

3M 230U is a flexible sanding tool on a D-paper backing. Due to its coarse grit series and open grit distribution, it is suitable for sanding wood by hand or with an orbital sander.

The 3M Secure Click HF800 / HF801 series half masks are designed to provide effective and comfortable protection against many common gases, vapours and particles in industrial environments in conjunction with the corresponding filter range. They are available in three sizes and are optionally equipped with a speech diaphragm (HF800SD / HF801SD) to facilitate communication during work. Low breathing resistance: Easier breathing and comfort thanks to the world's first 4-way airflow filter system. Two dual airflow filters on the respirator together form four airflow paths for easier breathing. Easy to use: The new 3M Secure Click series is characterised by a quick and easy filter connection. It works as simply as a safety belt. Simply align the filter in the connection piece provided and click it into place until you hear a click. Then you can be sure that the filters are connected correctly. The quick, easy, one-touch seal check helps to increase confidence in the secure seal of the mask. The optional speech diaphragm has been developed to facilitate communication during work. Comfort: The silicone face seal with patented, flexible nose profile is soft and offers a comfortable fit for the mask wearer. The head strap is easy to adjust and adapt. The exhalation valve helps to channel respiratory heat and moisture downwards. This half mask series is used together with 3M Secure Click filters from the D8000 (gas/vapour filter), D3000 (particle filter) and D7000 (particle insert filter) series against a wide range of gases, vapours and particles in accordance with EN approvals.

The 3M cable lubricant Lub-P is especially suitable for use in the energy supply and industrial sectors. Due to its special consistency, it forms a secure lubricating film on the cable sheath, even on heavy cables. It can be applied either by hand or by injection or pumping. Lub-P facilitates the pulling through and laying of cables and wires by reducing friction. Signs of wear are significantly reduced - both on the cables and on the equipment used. This effectively prevents cable sheath damage and also prevents cables from becoming tangled or getting stuck. It is therefore particularly recommended for long and winding cable runs. The transparent, water-based cable lubricant can be wiped off easily and cleanly if necessary. Neither silicone nor grease residues make it difficult to work on the cables. In addition, it does not cause irreversible stains on clothing, equipment or surroundings. Lub-P dries out very slowly and is therefore very economical. It leaves only a minimal residue as it contains less than 5.5 per cent solid components. This means that the cables do not stick together or to other cables, which facilitates their movement. It is suitable for high-performance cables and regular 600 V cables, as well as for most cable materials, including polyethylene and semi-cons. It is also compatible with semi-conductive materials. This means that, unlike wax or hydrocarbon based lubricants, it does not affect the volume resistance of medium and high voltage cable sheaths or the insulation layer. Lub-P is extremely temperature-stable and non-flammable. It therefore maintains the flame-retardant and self-extinguishing properties of the cable.

Deburring of shaft and piston rods before hard chrome plating; deburring of turbine blades, stamped flat parts, thread guides and machine parts, gear wheels, die-cast and injection-moulded parts, automotive parts (e.g. piston rings, pistons), parting lines on cast and pressed parts; Attention: The direction of rotation must be observed!

3M Secure Click filter cover D701 for use with the half-mask series Secure Click HF-800(SD). The 3M Secure Click filter cover D701 is required to connect the particle insert filters of the D7000 series with the gas/vapour filters of the D8000 series to form a combination filter.