3M 5451 and 5453 are PTFE-coated glass fibre adhesive tapes with a resilient silicone adhesive. These adhesive tapes have very good sliding properties, a very good non-stick effect and a high thermal and mechanical load capacity. Adhesive tape for coating plastic film welding equipment and as a sliding coating with high mechanical strength and an adhesive-repellent surface.
Properties
Thicker version of the 3M 5451
Works where other tapes give up
Combines the slip properties of PTFE with the mechanical strength and temperature resistance of glass fibre
Advantages
Short-term temperature resistance up to +260 °C
Product benefits
Works where other adhesive tapes give up
Field of application
Coating of surfaces where sliding properties, high thermal, chemical and mechanical resistance are required
On conveyor and transport rollers in baking systems or in packaging systems and plastic film sealers
As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.
0 from 0 Reviews
Give us a rating!
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
41310
Part number:
54537533
SAP number:
7000050130
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
This disc is the preferred choice for grinding and sharpening temperature-sensitive steels and HSS tools. The use of aluminium oxide produces a particularly cool cut to avoid additional thermal stress on the workpiece. We offer you a wide range of dimensions to cover the most common applications. A reduction ring set is already included in the packaging and can also be reordered.
Give extremely hard materials such as ceramic, stone and glass an exceptional finish with 3M Diamond Lapping Film 668X. These PSA versions of our 661X film consist of precisely graded diamond particles coated on a polyester film. Available in various grades between 0.10 and 30.0 microns.
Vitrified bonded grinding discs are mainly used in workshops and repair shops. They are particularly versatile for grinding and sharpening various components. The harmonised specifications enable a wide range of applications from coarse to fine grinding. These discs are supplied in retailer-friendly packaging for space-saving storage. A reduction ring set is already included in the packaging and can also be reordered.
3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals, plastics or glass. This adhesive has been specially developed for use at high temperatures and prior to powder coating.
tesa 4338 is characterised by a strong green colour, which is used particularly in industries such as shipping, commercial vehicles, aviation and the painting of rail vehicles. What is important here is the high flexibility of the backing material, a precise painted edge and a colour that stands out clearly from the substrate. The ageing-resistant natural rubber adhesive has very good initial adhesion, can remain on the painted object for up to a week outdoors, is temperature-resistant up to 120°C and can be removed without leaving any residue after the painting and curing process.
With the 3M Xtract Cubitron II 710W mesh sanding disc, dust extraction meets industry-leading cutting performance. This premium mesh sanding disc features a unique sanding pattern on a mesh backing that allows for virtually dust-free sanding with 3M's legendary precision grit technology. You'll process more parts per disc with less dust in the environment, increasing productivity without compromising worker health. The 225mm dimension is specifically designed for a giraffe sander / long-neck sander for drywall sanding. Sanding, rethought.
Dust reduction and sanding performance are no longer opposites. By combining the legendary technology of the 3M precision moulded ceramic grain with a mesh backing, the 3M Xtract Cubitron II Grid Sanding Disc 710W achieves an industry-leading removal rate while providing virtually dust-free sanding. The 3M precision ceramic grain continuously breaks into sharp cutting edges and offers twice the life and twice the cutting performance of leading competitive mesh discs.
Take advantage of the 3M Xtract Cubitron II Mesh Grinding Wheel 710W to gain a competitive edge in your industry - from metal and woodworking to aerospace, marine, rail and automotive OEM applications.
Enables a safer working environment.
A clean working environment is a safer working environment. The 3M Xtract Grinding Wheel 710W enables the extraction of more than 95% of the dust generated during sanding, reducing exposure to airborne particles and creating a healthier, virtually dust-free working environment. In addition, the 3M precision grit in the disc requires less pressure from the user, which makes sanding more comfortable.
Experience the benefits of the 3M Xtract system.
3M is your system provider for all sanding needs. From mains sanding discs to random orbital sanders and mobile dust extractors, we offer everything you need to increase productivity and quality in your business. 3M's technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution.
Variants from €2.02*
€1.88*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.