3M 662XW Diamond Lapping Film, 9.0 micron, disc 127 mm

With 3M Fasara privacy films, glass surfaces can easily be given a stylish look, even retrospectively: The self-adhesive polyester films are ideal for creating privacy in glass-emphasised architecture (offices, meeting rooms) and offer a wide selection for decorative applications on glass. The application is  simple, quick and does not require any removal of the existing glass during processing. Polyester film (75 µm), solvent-based adhesive (removable). Functional life of up to 5 years when used indoors and up to 3 years when used outdoors (Mat Crystal2 and Milky Crystal only). Wet application recommended. Various decors with different surface structures. No transfer tape required even for large-area application.

The 3M adhesive marking tape 471F is a soft PVC adhesive tape for various applications. It is suitable for covering and sealing all surfaces and containers, including round and irregularly shaped ones, for interior decoration, as hazard marking, for labelling playing fields and areas and for general marking and protection. The film is very conformable, abrasion-resistant and resistant to many solvents except ketones, chlorinated hydrocarbons and esters.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x air flow indicator TR-971

tesafix 4959 is a double-sided non-woven tape. It is coated with a modified acrylic adhesive that is resistant to light and ageing. The adhesive is largely resistant to plasticisers and is characterised by a very high initial tack and good shear strength.

The microfinishing film on a 3-mil backing with aluminium oxide abrasive grain is available in grit sizes from 9 to 100 microns. The disc is equipped with a dust-repellent coating - FreCut - which significantly increases the service life. The back of the disc has a Velcro fastening for quick tool changes.

This product family is compatible with ribbon cables or round/flat cables with conductor spacing of 1.27 mm. The proven insulation displacement contacts are designed for solid and stranded conductors for increased design freedom in circuit and system development. Stranded conductors with conductor cross-sections of AWG 26 (0.141mm²) and AWG 28 (0.089mm²) or solid conductors with AWG 26 (0.128mm²) or AWG 28 (0.08mm²) can be processed. The contacts in the mating area have a gold coating for optimum electrical performance. The adhesive strips in the cover of the connectors are a valuable aid for manual processing. The cover is positioned at the intended location on the cable and adheres there thanks to the adhesive strip. The connector body is latched into the cover from below and the cover, cable and body are pressed together using a tool. Sturdy metal hooks ensure a secure connection between the plug components and the cable. A plastic lug on the outer housing wall serves as a centre coding. It fits exactly into the recess of the mating connector on the circuit board, preventing incorrect mating and possible damage to the circuit or system. The female connectors are compatible with the 3M 3000 and 2500 series receptacle plugs  for PCB mounting. The 3M 3365, 3659 and 3759 series cables are suitable for cable assembly and the products are of course UL listed.