For highly efficient liquid filtration from the outside to the inside, use the 3M filter cartridges Series 740. In applications with high requirements for contaminant separation, our filter cartridges allow higher flow rates than standard products with a diameter of 6.35 cm. This means that significantly fewer filter cartridges are required for a given flow rate. The filter medium used in the 3M 740 series filter cartridges is based on 3M polypropylene microfibre. Our manufacturing processes enable production according to strictly controlled specifications. The result is a filter media with consistent and predictable particle retention properties. The microfibre media is radially pleated (a 3M innovation) - this optimises the usable filter area of the inserts. End caps, outer sleeves and cores made of polypropylene from the 3M filter cartridge series 740 protect the pleat composite and result in a robust filter construction. A double O-ring seal reduces the risk of liquid bypassing the filter. 3M filter cartridges series 740 are available for particle sizes from 1 μm to 70 μm (with a particle separation efficiency of 99.9 %). The 3M filter cartridges series 740 are pleated polypropylene microfibre depth filters. They are suitable for filter housings that accommodate large filters with an outer diameter of 16.51 cm, a length of 101.6 cm and a 226 O-ring connection.
- Higher flow capacity per filter cartridge - resulting in lower filter consumption, fewer filter changes and greater sealing reliability thanks to fewer sealing points
- Radial pleating technology - for high absorption capacity
- 3M microfibre filter medium - for constant and predictable filter performance and high particle separation rates throughout the entire service life
- Easy handling - filter change without special tools or aids
- Filter construction made entirely of polypropylene - offers high chemical resistance
Log in