3M Cubitron II Roloc grinding disc 984F, 76.2 mm, 36+ #491059

Support carrier for Cubitron II fibre discs, optimum power transmission and increased sanding performance.

3M Scotch-Brite Roloc compact discs XL-UR are made of resistant and durable Scotch-Brite fibre fleece EXL. They are primarily used for light deburring work. The disc is available in various hardnesses.

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals, plastics or glass. The products are characterised by their high transparency.

Rubber backing pad with metal threaded core and integrated M14 mount for direct use on angle grinders, especially suitable for use with Roloc Bristle, non-woven, abrasive and fibre discs

In developing the 3M Cubitron II Fibre Disc 982CX Pro, 3M engineers have reformulated the breakthrough technology behind 3M Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to help you be even more productive in your work. The advantage of a complete system 3M Cubitron II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you use 3M Cubitron II discs with our pneumatic angle grinder, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across the industry. When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M Cubitron II 982CX Pro fibre disc allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced.

Rubber backing pad with metal threaded core and integrated M14 mount for direct use on angle grinders, especially suitable for use with Roloc Bristle, non-woven, abrasive and fibre discs. Backing pads 05539 and 05540 also with fixing screw and nut for 7/16'' - 20 UNF thread (USA).

3M Hookit Paper Sanding Sheet 255P is a reliable universal abrasive for all large-area lacquer sanding work. This product can be used for coarse, intermediate and fine sanding on all hard and soft woods, lacquer systems, but also for sanding plastic and metal surfaces. Its FreCut coating prevents premature clogging and thus increases the service life.

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.

Depending on the requirements, the red, grey or white polishing foam is exactly the right choice. The nubbed structure gives the polishing paste used a higher performance and at the same time contributes to better cooling during the polishing process. The grey polishing foam combines high removal with the longest service life. With the red polishing foam, you can achieve very good results with equally amazing durability. And with the white version, you can achieve a real high gloss and impressive finishing results.

The 3M Versaflo compressed air cooling V100E is a compressed air reducing valve worn on the belt. In combination with a 3M blower and compressed air headpiece, it forms a compressed air assisted respiratory protection system with permanent air flow. The V-100E cooling tube enables the compressed air to be cooled by a maximum of 28°C. the temperature of the breathing air can be individually adjusted using a temperature regulator. An integrated warning whistle sounds if the air flow to the head section falls below the minimum flow rate specified by the manufacturer. The compressed air cooling system is mounted on a protective pad on the belt. Areas of application are heavy industry and foundries (high radiant heat). Air volume: 170-600 litres/min. Working pressure: 6-10 bar. Test: EN 14594 You need a purified breathing air according to DIN EN 12021 or DIN EN 12021:2014 beforehand.

The square file is used in particular for the efficient processing of tools in the woodworking and mechanical engineering industries. Files made of silicon carbide are mainly used for carbide or carbide-tipped tools and have a grey-green colour. Orange coloured files are mainly used for all types of steel and stainless steel. The different grain sizes allow you to select your tool individually for your application.