3M Diamond Grade DG³ Reflective Film 4084, Fluorescent Orange, 914 mm x 45.7 m

Variants

Breite in mm

Farbe

Reset selection

€3,463.76* % €0.00* (0.00% saved)

Unit price: €3,463.76* % €0.00*

Unit price (net): €2,910.72 % €0.00

Contents: 45.7 meter (€75.79* / 1 meter)

Delivery time 9-15 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Diamond Grade DG³ Reflective Film 4084, Fluorescent Orange, 914 mm x 45.7 m"

The 3M Diamond Grade DG³ reflective film with the latest 3M technology utilises cat's eye optics to maximise the amount of light reflected back to the driver. Suitable for all traffic situations in and out of town and on motorways, DG³ reflective film offers very wide viewing angles and outstanding performance at all distances and in all weather conditions. Signs are very easy to recognise even in difficult visibility conditions on roads at night. 3M Diamond Grade DG³ Reflective Film Series 4000 is approved for the production of traffic signs in accordance with the European Technical Approval (ETA). Microprismatic reflective film according to DIN 67520 (RA3,C) and DIN 6171, part 1. technical information: SG 92. screen printing colour: series 880i

Properties

Demographic developments are also increasing the need for better road equipment.
Older drivers have longer reaction times and poorer night vision. Signs made with 3M Diamond Grade DG³ reflective film increase the brightness that older drivers need to a greater extent.
Different vehicle sizes - from cars to SUVs to semi-trailers - create significantly different viewing angles. Traffic signs with 3M Diamond Grade DG³ Prismatic reflective film will also meet the requirements of drivers of large vehicles

Advantages

3M™ Diamond Grade DG³ prismatic reflective films can make the external illumination of signs superfluous (e.g. for overhead signposts).
The manufacturing process for microprismatic films is also much more environmentally friendly than that for reflective films with glass beads.
VOC emissions are reduced by 97%, energy consumption by 77% and waste generation by 46% compared to the production of glass bead-based films.

Product benefits

The long service life minimises the costs for sign replacement and disposal.
Fluorescent colours for a stronger signalling effect in daylight and unfavourable visibility and weather conditions. Typical areas of application: school areas, danger zones, railway crossings, areas with speed limits and construction sites.

Field of application

For signs that are positioned unfavourably, e.g. overhead or on the left-hand hard shoulder.
Short, medium and long viewing distances

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 13849

Part number: 408491

SAP number: 7100207266

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

Recently viewed products

Tyrolit Grinding tool for the automatic chainsaw sharpener DxDxH 140x3.8x12 For steel, shape: 1F, Art. 123716

With this disc, you get a precise product that increases the service life of your chainsaws many times over. The profile radius of this product corresponds to half the disc width and is perfectly matched to the basic tooth radius. You receive this tool with edge profile shape 1F in diameter 140 mm, suitable for dry grinding.

€9.16*

3M Temflex 165 vinyl electrical insulation tape, brown, 19 mm x 20 m, 0.15 mm

When you need a reliable general purpose PVC insulating tape, use 3M Temflex 165 tape. This affordable solution offers reliable performance for protective sheathing, cabling, marking and insulation of low voltage cables in non-critical applications. 3M Temflex 165 vinyl insulating tape is a high quality 0.15 mm thick, general purpose insulating tape. It is highly resistant to moisture and changing weather conditions. It is a flame-retardant polyvinyl chloride (PVC) and adaptable in application. 3M Temflex 165 tape offers excellent mechanical protection with minimal bulk. It is UL, CSA and VDE certified, approved according to standard IEC 60454-3-1. 3M Temflex 165 vinyl insulating tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based pressure-sensitive adhesive. The tape is 0.15 mm thick, UL listed and labelled as "flame retardant and cold resistant" according to UL standard 510. The tape can be applied at temperatures from 0 °C to 38 °C without affecting its physical properties. It is classified for indoor and outdoor use and is compatible with synthetic cable insulation, sheathing and bonding materials.

Contents: 20 meter (€0.08* / 1 meter)

Variants from €0.81*

€1.64*

3M polyurethane film adhesive tape PU5020P, transparent, 75 mm x 50 m, 0.250mm

The 3M high-performance protective films have been specially developed for the protection of painted car surfaces to protect the paint against mechanical influences and to maintain the appearance in the long term. The 3M paint protection films are particularly suitable for protection against chemical and mechanical influences (e.g. stone chipping) and long-term protection against environmental influences. The broad product portfolio enables customer-optimised applications, so films adapt to complex contours and, thanks to their good adhesive properties, films can also be applied around corners and edges.

Contents: 50 meter (€6.57* / 1 meter)

Variants from €109.46*

€328.37*

Tyrolit Resin-bonded CBN for dry grinding DxDxH 125x40x20 For unalloyed and low-alloy steels, high-alloy steels and HSS, shape: 11V9, Art. 641854

This tool is used to grind all cutting tools for the wood and metal industry as well as various shear blades. These products are disc and cup wheels in the CBN grit size range B181 - B91. Compared to conventional corundum discs, CBN discs have significantly lower wear and higher dimensional accuracy.

€171.74*

3M Diamond Grade contour marking 943-71, yellow, 50.8 mm x 50m

3M Contour Marking Series 943 is a durable, flexible, microprismatic, retroreflective contour marking. 3M™ Contour Marking Series 943 was developed to mark vehicles with fixed bodies in accordance with UN/ECE 104 for increased visibility and attention with a retroreflective contour. 3M Contour Marking Series 943 is coated with a permanent adhesive for application to painted or unpainted metal substrates. The film is resistant to petrol vapours and occasional fuel spills. It is also reflective in wet conditions.

Contents: 50 meter (€2.44* / 1 meter)

€122.18*

TYROLIT Resin cup D/JxTxGE 130/90x55xM14 For stone, shape: 11ZB cup wheel, Art. 310995

Cup wheels achieve maximum stock removal and service life for large-area grinding work. The cup wheel available for stone is particularly suitable for grinding scars on exposed concrete surfaces, chamfering and pre-grinding artificial stone and terrazzo tiles as well as surface grinding on marble, slate and granite. The user can choose between the 22.23 bore version and the M14 thread version for the tool holder. Note working speed: max. 50 m/s

€31.02*