3M Diamond Grade DGÂ³ Reflective film 4092, red, 1220 mm x 45.7 m

Variants

Breite in mm

Farbe

Reset selection

€4,743.07* % €0.00* (0.00% saved)

Unit price: €4,743.07* % €0.00*

Unit price (net): €3,985.77 % €0.00

Contents: 45.7 meter (€103.79* / 1 meter)

Delivery time 9-15 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Diamond Grade DGÂ³ Reflective film 4092, red, 1220 mm x 45.7 m"

The 3M Diamond Grade DG³ reflective film with the latest 3M technology utilises cat's eye optics to maximise the amount of light reflected back to the driver. Suitable for all traffic situations in and out of town and on motorways, DG³ reflective film offers very wide viewing angles and outstanding performance at all distances and in all weather conditions. Signs are very easy to recognise even in difficult visibility conditions on roads at night. 3M Diamond Grade DG³ Reflective Film Series 4000 is approved for the manufacture of traffic signs in accordance with the European Technical Approval (ETA).Unprinted Diamond Grade Film DG³ Series 4090 for the production of Form B parking warning signs for lorries, trailers and caravans in accordance with § 17(4) StVO and § 51c(5) StVZO. Screen printing colour: 880i, Technical Information SG 79.

Properties

unprinted film
Type 3 / constructive structure C, RA3
30% more reflection compared to conventional type 3 film
Combines the properties of type A and type B in accordance with DIN 67520-4
Extremely wide angularity for left-hand installation and overhead signage

Advantages

Retroreflective
Suitable for outdoor use

Product benefits

For the production of parking warning signs for lorries
Trailers and caravans

Field of application

Can be used under polarised light
Reflects the visible part of the spectrum
Limited suitability for wavelengths in the short-wave IR range
Suitable for outdoor use
For use in e.g. transport and warehouse control or in light barrier and conveyor technology
Microprismatic reflective film for the production of RAL quality traffic signs, signposts and traffic facilities in accordance with DIN 67520 (RA3,C) and DIN 6171, Part 1.

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 84523

Part number: 4092122

SAP number: 7100197734

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

Recently viewed products

3M PE foam adhesive tape with rubber-resin adhesive 9528W, white, protective paper: colour brown, 9 mm x 66 m, 0.8 mm

3M 9528 double-sided adhesive tapes with polyethylene foam backing are equipped with a rubber-resin adhesive. These tapes offer a powerful combination of very high initial tack and high shear strength. Further characteristics are determined by the foam carrier. This can - within certain limits - bridge unevenness and tolerances and also has a vibration-damping effect. These adhesive tapes are used for permanent fastening or mounting, e.g. of holders, hooks, emblems, signs, mouldings, panelling and components, in many industrial applications. They are also used in the advertising and decoration sector for attaching displays and decorative parts. 3M 9528 are particularly suitable for low-energy surfaces such as PP and PE.

Contents: 66 meter (€0.20* / 1 meter)

Variants from €9.76*

€13.30*

Tyrolit Serrated lock washer DxH 178x22.23 LONGLIFE for steel & stainless steel, P40, shape: 28N - straight version (plastic carrier body), Art. 680387

The PREMIUM LONGLIFE flap disc offers maximum service life and excellent stock removal. This flap disc is used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. Problem-free weld seam processing as well as edge and surface grinding, especially when used on powerful angle grinders.

€7.93*

3M 94-AK 640-1/C QS200 Connection set, 1 conductor, 18/30 kV, 1x 120 - 300 mmÂ², screw connector

The 3M Cold Shrink Fittings for Medium Voltage Series QS200 are designed for the unique cold shrink installation system. The products are supplied pre-stretched on a removable support spiral for efficient and easy installation. The electrical field control and Faraday cage, both integrated into the insulating body, simplify installation. The specific properties of the insulating silicone body allow a wide range of cable cross-sections to be connected. Connection fittings for medium voltage are available both with and without screw connectors. The 3M cold shrink fittings for medium voltage were developed as a simple and safe solution for connecting medium voltage cables.

Variants from €283.08*

€369.40*

Tesa 50600 150mmx66m green

tesa 50600 is a green, extremely heat-resistant polyester masking tape with a silicone compound. For masking surfaces that are not to be coated during powder coating.

Contents: 66 meter (€0.62* / 1 meter)

Variants from €41.95*

€40.86*

TYROLIT cut-off wheels DxDxH 178x2.0x22.23 For stainless steel, shape: 41 - straight version, Art. 367777

The chemical purity of these tools is a prerequisite for processing stainless steel grades in order to avoid negative material influences such as corrosion, pitting or reduction in fatigue strength. This tool is suitable for cutting sheet metal, profiles, pipes, rods and solid material. The range of these cut-off wheels extends from 1.0 to 1.9 mm thick for faster, more comfortable and burr-free cutting. Between 2.0 and 2.5 mm, the more stable discs have a very long service life and can be used universally.

€2.32*

3M Cubitron 3 rough grinding wheel, 150 mm, 7.0 mm, 22.23 mm, 36 , type 27 # 98452

The 3M Cubitron 3 grinding disc is an extremely fast cutting and durable rigid bonded disc for weld removal and other heavy duty grinding applications. It has a recessed centre that allows grinding at any angle and is suitable for use on almost all materials, with a special formulation for stainless steel, mild steel and aerospace alloys. The 3M Cubitron 3 grinding disc uses the re-engineered 3M Precision Moulded Grain, which utilises proprietary micro-fragments of molecular bond technology. Their structure is created in such a way that they break continuously during the grinding process and always form many sharp cutting edges. These smooth, sharp edges help to create an abrasive that cuts faster, grinds cooler and lasts much longer than conventional abrasives. 3M Cubitron high performance abrasives are designed for professionals who demand more from their equipment. Choose the 3M Cubitron 3 grinding disc to experience the next generation of grinding performance.

€11.50*