3M Electrically conductive adhesive tape XYZ axis 9713, 101.6 mm x 9.1 m, 76.2 µm

3M 9713 is a double-sided, isotropically electrically conductive adhesive film that is conductive both vertically (Z-axis) and horizontally (X-Y plane). It is characterised by good adhesive strength and good electrical conductivity.

The 3M Scotchcast 92-NA U series cast resin bonding set is characterised by its flame resistance in accordance with UL 94-V0 (3 mm). It also has increased chemical resistance to hydrocarbonates. This makes it particularly suitable for use in heavy industry (mining and industry). It is designed for one to five-core, non-armoured low-voltage plastic cables and ensures the electrical insulation and mechanical protection of both compression and screw connectors. The SVHC-free connection set, tested in accordance with EN 50393, can be used indoors and outdoors as well as in the ground or under water. The two-part moulded shell can be folded up in no time at all and closes by automatically snapping into place. It is made of transparent, pink-coloured plastic and thus enables both marking and easy checking of the connector spacing in the socket. The Scotch 23 self-sealing rubber tape ensures optimum sealing of the fitting. A GMG system (closed mixing and pouring) is used when pouring the 3M Scotchcast 1402 FR casting resin, which is also included in the scope of delivery and is flame-retardant. This practically eliminates contact with the casting resin during processing. The transparent mixing bag guarantees visual control of the mixing process. After use, the mixing bag can be disposed of with the cured casting resin residue as normal household waste. Disposal as hazardous waste is not necessary. Flame-retardant and chemically resistant: The cast resin joint set for one to five-core, non-armoured low-voltage cables meets the high requirements of mining and industry.

With the 3M SecureFit Safety helmet X5512V-CE provides you with safe and comfortable head protection. The safety helmet was designed for general industrial use and everyday safety requirements. Inspired by modern climbing helmets, it offers protection against small falling objects. Optional ventilation openings allow air to flow through the helmet. The helmet height on the head is adjustable. With the easily adjustable 4-point ratchet fastening system, the head strap can be conveniently adjusted to suit requirements. Integrated into the helmet is the exclusive, patented 3M Pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearing comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. The rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. This black safety helmet is equipped with a patented 3M UVicator Sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. Optional 3M Scotchlite Reflective material increases visibility in poor light conditions. The existing notches and holders for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. A chin strap with magnetic or plastic fastener can also be added as an option. Tested for lateral deformation and fulfils the EN 397 standard for industrial safety helmets.

The 3M cable lubricant Lub-L is especially suitable for electrical installations. It makes it easier to pull in cables and wires by reducing friction. Signs of wear are significantly reduced - both on the cables and on the devices used. This effectively prevents cable sheath damage and also prevents cables from getting tangled or stuck. It is therefore particularly recommended for long and winding cable runs. The transparent, water-based cable lubricant does not drip and can be wiped off easily and cleanly if necessary. Neither silicone nor grease residues make it difficult to work on the cables, for example when inserting connecting sleeves. In addition, the skin-friendly product does not cause irreversible stains on clothing, equipment or surroundings. Lub-L dries out very slowly and is therefore very economical. It leaves only a minimal residue as it contains less than 5.5 per cent solid components. This means that the cables do not stick together or to other cables, which facilitates their movement. It is suitable for high-performance cables and regular 600 V cables, as well as most cable materials, including polyethylene and semi-cons. It is also compatible with semi-conductive materials. This means that, unlike wax or hydrocarbon based lubricants, it does not affect the volume resistance of medium and high voltage cable sheaths or the insulation layer. Lub-L is extremely temperature-stable and non-flammable. It therefore maintains the flame-retardant and self-extinguishing properties of the cable.

Brushes are particularly suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Also particularly suitable for cleaning the inside of pipes. Brushes with silicon carbide are very hard and therefore enable very high removal rates. They are used, among other things, for deburring work on various workpieces made of almost all materials such as steel, aluminium, stainless steel, copper, brass, etc. Silicon carbide is also used for wood structuring.

The 3M precision-moulded ceramic grain contributes significantly to the performance of this disc. The grain tips of the triangular discs break during the sanding process, leaving sharp cutting edges at all times. The surface of the material is therefore continuously cleanly processed. The result is fast, cool sanding and an extended service life of the abrasive. This abrasive paper is a sanding tool for coarse and fine sanding of all types of wood, stainless steel sheets and leather. The semi-open coating prevents premature clogging of the sanding tool.