3M Flap disc 577F, 125 mm x 22 mm, P40, flat

PVC adhesive tapes offer a wide range of applications due to their solvent resistance, colour quality, elasticity and abrasion resistance.

3M Scotch-Weld AC11 is used to enable instant curing of Scotch-Weld cyanoacrylates as required. It is particularly suitable for slower curing, high viscosity grades and for porous substrates where the adhesive needs to cure before being absorbed into the substrate. 3M Scotch-Weld AC11 can also be used to cure both 3M™ Scotch-Weld™ cyanoacrylate adhesives as well as other adhesives outside the joint.

The 3M HDT-A heat-shrinkable tubing is a thick-walled heat-shrinkable tubing made from modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and earth cables for both outdoor and underground installations. It is used to insulate and seal all types of connections, especially as an outer conduit for control cable fittings. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat-shrink tubing is UV-resistant and resistant to many chemical influences. Its shrink ratio is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is self-extinguishing and complies with the Lloyds Register of Shipping MIL-I-23053/15 test standard.

3M DBI-SALA Rollgliss R550 Abseilgerät mit Rettungskurbel, 2 unabhängige Fliehkraftbremsen, PowerDrive, 2 Umlenkpunkte, Seilbremse, Kernmantelseil, 9,5 mm, Länge 100 m, 2 x Stahl Automatikkarabiner Öffnungsweite 19 mm am Seil, Stahl Twist-Lock Öffnungsweite 17 mm am Gerät, 3M Connected Safety-ready RFID Tag für Inspektion, 100,0 m

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

In foundries and mould making, ceramic mounted points are often the only way to achieve improved surface results in hard-to-reach areas. PREMIUM mounted points from TYROLIT offer the longest possible service life, even for hardened steels. These tools also offer an optimum balance between clamping power and the surface finish to be achieved. Maximum working speed: 50 m/s