3M Flexible diamond disc 6002J, 125 mm, N250

The PREMIUM LONGLIFE flap disc offers maximum service life and excellent stock removal. This flap disc is used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. Problem-free weld seam processing as well as edge and surface grinding, especially when used on powerful angle grinders.

Flexible vinyl flooring with a fine, open loop structure without backing for safe and comfortable walking in barefoot areas. The open structure ensures rapid drainage of moisture. For all wet areas such as changing rooms, swimming pools, saunas and bathrooms. Suitable for boats, sports centres, hotels, hospitals, etc. Material height 9 mm. Slip resistance according to DIN 51097: A+B+C.

The 3M 410M double-sided adhesive tape with paper backing has a very high immediate adhesion due to the rubber-resin adhesive. It is designed for bonding to a wide variety of material surfaces such as metal, paint, glass, ceramics, plastics including low-energy surfaces (e.g. PE, PP).

3M Diamond Grade Contour Marking Series 983 has been specially developed for use on vehicles with fixed bodies to increase their visibility. Available in roll form, the 983 contour marking is characterised by excellent reflection and luminosity. Durability of up to 10 years.

This pendulum surface grinding wheel ensures universal use on high-alloy steels and HSS. This is achieved through the use of special aluminium oxides and mixtures with sintered aluminium oxides combined with special bond systems. The highest cutting performance can be achieved with sintered aluminium oxide compounds such as 454A. The next higher quality level is the resin-bonded VIB-STAR CBN wheel from TYROLIT.

The orange 3M EMS iD ball marker - Telephone makes marking and subsequent location of underground telephone lines extremely easy. It can be located to a maximum depth of 1.20 metres, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for all types of soil. The free-floating design in a watertight PE sphere ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the sphere is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage power lines. The EMS iD markers are supplied with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly onto the cable/location plan. If the ball marker receives the "Read"-Signal from a 3M Dynatel cable locator, it transmits the information previously stored in it. The iD markers can be temporarily or permanently programmed to store user-defined information such as cable or joint data, type of application or other important details. Once this data has been read by the locator, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.