3M GTE6208F Acrylic adhesive tape, grey, 6 mm x 66 m, 0.8 mm

3M Acrylic Plus adhesive tape made from a black acrylic foam with additional acrylic adhesives on both sides. Typical applications are fixings of rigid add-on parts such as spoilers, sills, aerial housings, roof rails and wheel arch extensions etc. where an aesthetically pleasing visible edge is required. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The unique viscoelastic properties of PT1100 provide excellent stress relief in the bonded seam, resulting in extremely durable joints.

3M Acrylic Plus double-sided tape EX 4511 is a deep black, double-sided Acrylic Plus tape for the attachment of automotive components - without the use of adhesion promoters or surface pre-treatments such as scarfing. EX4511 offers an advanced adhesive formulation - on both sides of the tape. It is therefore characterised by very good adhesion to modern, difficult-to-bond automotive paints and can be used on medium-energy plastic surfaces such as ABS without adhesion promoters or surface pre-treatments. The foam core guarantees good wetting and adaptation to the surface geometry. In addition, the EX4511 adhesive tape is characterised by good internal strength and good long-term stability.

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each replaceable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray™ nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, which reduces the amount of sanding required. Only compatible with the 3M PPS 2.0 series.

The 3M PPS 2.0 Series Kits are our next generation, high performance disposable cup systems for mixing/measuring, filtering and spraying in any direction (360° spray rotation) and protecting paints when not in use.  Each lid and inner cup kit contains 50 disposable lids with integrated sleeves and full-width filters, 50 disposable inner cups, 1 reusable hard plastic outer cup and 32 caps.

The 3M Accuspray gun HG14, together with the 3M Accuspray nozzle heads and the 3M PPS cup system, optimises the filler application process in every paint shop. The nozzle heads can be replaced after each application in just three simple steps. You save yourself the hassle of cleaning the filler gun and have a virtually new device for every application. The 3M Accuspray system works with the proven HVLP technology (High Volume Low Pressure). This ensures a smooth surface and ideal layer thickness of the filler. Time-consuming sanding is thus reduced to a minimum. In addition, hardly any spray mist is produced, which noticeably reduces material consumption and is also good for your health. The 3M Accuspray gun weighs just 324 grams and has excellent ergonomics. This means that it is easy to apply filler even in hard-to-reach places and from any angle. This increases your productivity and saves material, time and costs.

3M Acrylic Foam adhesive tape made from a grey medium density acrylic foam. Typical applications include attachment of add-on parts such as bumpers, mouldings, emblems etc. GT6008 has good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces to be bonded. The uniform viscoelastic properties of GT6008 provide excellent stress relief in the bonded joint, resulting in extremely durable bonds.