3M High-performance nozzle head for flow cup Performance Gravity HVLP Atomising Head Refill Kit 26713, Green, 1.3 (Pack=5 pieces)

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

The 3M maintenance-free half mask 4279+ offers you effective respiratory protection as a user-friendly complete mask. The new, improved exhalation valve reduces breathing resistance during exhalation, reduces heat and moisture build-up and thus makes breathing easier, especially in hot and humid working environments. Our 4000+ series half masks have a soft, skin-friendly, silicone-free face seal. The FFABE1P3 R D filter class protects against many of the common organic gases, vapours and particles in industrial environments. The lightweight, well-balanced design with integrated, maintenance-free filter elements ensures good peripheral vision. The integrated filter elements are maintenance-free. You can use the half mask until it is time to change it according to the filter change schedule or until the filter elements are saturated. Then dispose of them properly. The comfortable harness with adjustable head strap offers a secure fit and adapts to different head shapes and sizes. The flat design does not restrict your field of vision and the two large-area activated carbon filters ensure low breathing resistance. Filter class FFABEK1P3 R D protects against organic (boiling point above 65 °C) and inorganic gases and vapours, acid gases as well as ammonia and particles up to 30 times the limit value. A resealable bag for hygienic storage and transport is included in the scope of delivery.

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each interchangeable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, reducing sanding time. Only compatible with the 3M PPS 2.0 series.

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each interchangeable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, reducing sanding time. Only compatible with the 3M PPS 2.0 series.

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.