3M High Performance Nozzle Head for Pressure Cups Performance Pressure HVLP Atomizing Head Refill Kit 26809, White, 0.9, (Pack=5pcs)

3M HVLP high performance nozzle heads for pressure cups provide excellent spray performance for coatings such as paints, primers, base coats, top coats, clear coats and adhesives. Replaceable nozzles have been specially developed for pressurised applications. These are used with the 3M high performance spray gun, which ensures a spray performance comparable to a completely new device every time the nozzle is changed.   What makes the 3M high performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance with every application, every day. 3M HVLP High Performance Nozzle Head Replacement Kits for Pressure Cups are available with 0.9, 1.1, 1.4, 1.8 and 2.0 size nozzle heads for a wide range of industrial and automotive coatings. They are suitable for high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M high-performance spray gun system. They are attached to the paint hose provided for this purpose and ensure continuous spray application from a pressurised container or tank. The nozzle heads are attached to the pressure hose of the 3M high performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for changing. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

3M Soft Pads are flexible foam pads that can be used to work on hard-to-reach areas such as headlight openings, areas around door handles and door jambs. Our sponge can be used wet or dry and helps to remove scratches. Use the 3M™ Soft Pads sanding sponge to remove imperfections in hard-to-reach areas. With our sponge, you can work on hard-to-reach areas such as headlight openings, areas around door handles and door openings. This sponge is ideal for preparing old paint coats for a new paint job. Ideal areas of application are wet or dry sanding of wood, paint, metal, plastic or plaster layers. If the sponge is used when wet, this reduces the number of dust particles in the air.

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer very high adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for many low-energy surfaces, powder-coated surfaces, plastics (not soft PVC) or glass. The use of primers can be dispensed with in many applications.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo safety helmet M306 with comfort face seal and polycarbonate visor, clear

3M DBI-SALA Sealed-Blok Sealed retractable fall arrester with rescue winch, RSQ function, length: 15 m, aluminium housing, stainless steel cable 5 mm, automatic swivel carabiner with fall indicator, opening width 18 mm, 3M Connected Safety-ready RFID tag for inspection, 15.0 m

Mit dem Ziegelsteinentferner von NORSE lassen sich Fugen um die Ziegelsteine schnell entfernen. Mit einer Arbeitslänge von 115 mm können Sie die Steine schnell austauschen. Die Länge entspricht der Breite von der Breite eines dänischen Ziegels, was bedeutet, dass er bei einer Doppelwand nicht auf den gegenüberliegenden Ziegel trifft.   Der NORSE Ziegelentferner ist mit Diamantkorn beschichtet und kann einfach auf eine M14-Spindel montiert werden und passt auf alle gängigen Winkelschleifer.