3M Hookit Velcro Purple Premium Strips 334U / 734U, 70 mm x 127 mm, P240, Multihole #30643

Variants

Breite in mm

Körnung

Länge in m

Reset selection

€0.60* % €0.00* (0.00% saved)

Unit price: €0.60* % €0.00*

Unit price (net): €0.50 % €0.00

Contents: 0.127 meter (€4.72* / 1 meter)

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Hookit Velcro Purple Premium Strips 334U / 734U, 70 mm x 127 mm, P240, Multihole #30643"

The 3M Hookit Purple Premium strips 734U / 334U / Multihole 70 x 127 mm Purple Premium are specially developed abrasives for the increased requirements in the car repair sector. Their high-quality Cubitron ceramic grain with an extra-firm grain bond provides a significantly higher removal rate and therefore considerably increases your productivity. They also have the improved dust-repellent Fre-Cut non-stick coating and their innovative arrow-shaped multi-hole perforation supports the suction system of the 3M Hookit Purple Premium hand blocks. Both prevent premature clogging of the grain surface. As a result, the abrasive strips are characterised by a noticeably longer service life with consistent continuous cutting performance. Their hook-and-loop backing made of 3M Hookit Brushed Nylon also enables quick and easy replacement, which saves a considerable amount of time. The use of the 3M Hookit interface pad is also recommended for sanding beads and edges.

Properties

Innovative arrow-shaped multiple perforation
High-quality Cubitron ceramic grit
Improved Fre-Cut non-stick coating
3M Hookit Brushed Nylon backing
Dust repellent
Full resin binding
70 x 127 mm

Advantages

Optimum dust extraction and therefore no premature clogging of the grain surface
Noticeably longer service life
Highest removal rate
Fast strip change

Product benefits

Time and cost savings due to lower material consumption
Increased productivity
Reduced health risks

Field of application

For manual and machine sanding
For pre- and intermediate sanding of lacquer and filler

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 22928

Part number: 51391

SAP number: 7100273612

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

Recently viewed products

FIX KLETT SC non-woven disc, 115 mm x 10 mm, 1FOR2 Extra Coarse, hook and loop

Technical surface conditioning fleece ideally suited for removing oxide layers, deburring and fine sanding. The newly developed 1FOR2 SC non-woven fabric (green) enables the removal of weld seams and spots while simultaneously fine sanding and levelling clean and smooth sanding transitions.

Variants from €3.34*

€3.64*

3M vehicle warning marking 823i-10, white, 1220 mm x 45.7 m

3M warning marking 823i is an impact-resistant, metallised, flexible warning marking and is suitable for use on painted, clean, smooth, non-porous and weather-resistant surfaces. 3M warning marking 823i for retroreflective vehicle markings is equipped with 3M Controltac technology, which enables special positioning when applying the film. The adhesive system acts as a mechanical spacer to the substrate. 3M Controltac is effective within a wide temperature range. This simplifies the installation of the film on large-format surfaces. 3M Comply is an adhesive technology that uses air channels in the adhesive to enable the film to be applied quickly, easily and without bubbles.

Contents: 45.7 meter (€71.29* / 1 meter)

€3,257.96*

Tyrolit Carbide end mill DxT-SxL 6x18-6x50 For stainless steel, shape: 52RBF - tree, Art. 34213624

These carbide end mills have been specially developed for use on stainless steel and manufactured on state-of-the-art CNC grinding machines. The newly developed geometry enables cool grinding with maximum tool life on hand-held, pneumatic and electric machines. The aggressive cutter shape is particularly long-chipping and thus ensures a large stock removal rate. Reduced heat generation protects the milling cutter and the workpiece.

€33.31*

Tyrolit Serrated lock washer DxH 115x22.23 CERABOND serrated lock washer for stainless steel, P60, shape: 28A - straight version (glass fibre carrier body version), Art. 34166173

At TYROLIT, we endeavour to constantly present our customers with innovative products and a comprehensive range. For this reason, TYROLIT has now added the new CERAMIC flap discs to the CERABOND family. A unique bond system combined with a high-performance PREMIUM cloth offers the user more aggressiveness. This flap disc is especially suitable for stainless steels and demanding grinding applications. In addition, the unique bond system prevents premature grit break-out and leads to a long service life of the product. An additional TOP SIZE coating enables cooler grinding, which leads to a longer tool life and reduced discolouration of the workpiece surface. Also in

€4.93*

3M Hookit Sanding discs, 115 mm x 225 mm, 10 holes, Festool, RS1, RS2, RS100, RS200

With the 3M Hookit Multihole sanding plate, dust generated during sanding is optimally extracted. Our wide selection of 3M Hookit Multihole sanding discs is suitable for a variety of sanding machines.

Contents: 0.225 meter (€444.04* / 1 meter)

Variants from €61.90*

€99.91*

3M Cubitron 3 Cut

The 3M Cubitron 3 Cut & Grind abrasive disc is a versatile solution that can be used as both a roughing and cutting disc - ideal for cutting, fillet grinding, gouging and more. Unlike other grinding products that are designed for just one task, this disc can tackle multiple challenges thanks to a flat, reinforced inner surface that can shape or grind objects and a thin outer edge that can be used to make perpendicular cuts and gouges. This design eliminates the need for multiple abrasives and can help maximise production. The 3M Cubitron 3 Cut & Grind abrasive disc utilises the re-engineered 3M Precision Shaped Grain, which uses proprietary micro-fragments of molecular bond technology. Their structure is designed so that they break continuously during the grinding process and always form many sharp cutting edges. These smooth, sharp edges help to create an abrasive that cuts faster, grinds cooler and lasts much longer than conventional abrasives. 3M Cubitron high performance abrasives are designed for professionals who demand more from their equipment. Choose the 3M Cubitron 3 Cut & Grind abrasive disc to experience the next generation of grinding performance.

Variants from €6.09*

€6.77*