3M MDT-A Medium-wall heat-shrink tubing with adhesive, black, 32/7.5 mm, 1 m

Variants

Durchmesser in mm

Typ

Reset selection

€16.34* % €0.00* (0.00% saved)

Unit price: €16.34* % €0.00*

Unit price (net): €13.73 % €0.00

Contents: 1 meter

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M MDT-A Medium-wall heat-shrink tubing with adhesive, black, 32/7.5 mm, 1 m"

The 3M MDT-A heat-shrinkable tubing is a halogen-free, medium-walled heat-shrinkable tubing made of radiation cross-linked polyolefin with a hot-melt adhesive coating. The hot-melt adhesive penetrates into all uneven areas and cavities and prevents the ingress of moisture. The 3M MDT-A heat-shrinkable tubing is suitable for insulating plastic and earth cables up to 0.6/1kV, both for installation in the open air and in the ground. The ageing-resistant heat-shrinkable tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink rate of 4.5 to one, you can cover large diameter jumps with just one tube. The 3M MDT-A heat shrink tubing fulfils the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS-compliant.

Properties

Modified, radiation cross-linked polyolefin with high ageing resistance
UV-resistant, halogen-free and resistant to many chemical influences
In hoses with a hot-melt adhesive, the adhesive melts and penetrates into all irregularities and cavities. This prevents the ingress of moisture
Medium-walled heat-shrink tubing without hot-melt adhesive and self-extinguishing types are available on request.

Advantages

Due to the high shrinkage rate of up to 4.5:1, large diameter jumps can be captured with one hose

Field of application

For insulating and sealing all plastic and earth cables.

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 80796

Part number: MDT-A32/7.5-B

SAP number: 7000037643

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

Recently viewed products

$3M 261X Lapping Film, 12 Micron, Roll 50.8 mm x 45.7 m, ASO 3\$

3M 261X Lapping Film, 12 Micron, Roll 50.8 mm x 45.7 m, ASO 3\

3M 261X on a 3 mil film backing with aluminium oxide grain is available in grain sizes 0.3 - 3 - 5 - 9 - 12 - 30 microns. The products are available in either ASO or ASI versions. ASO=Abrasives Side Out, i.e. the grain side is wound outwards, ASI=Abrasives Side In, i.e. the grain side is wound inwards. The inner diameter of the core is 76.2 mm and has 4 driving grooves.

Contents: 45.7 meter (€1.53* / 1 meter)

Variants from €74.76*

€69.77*

3M Double-sided adhesive tape with polyester backing 93020LE, transparent, 14 mm x 55 m, 0.20 mm

The carrier film of this adhesive tape gives foams and other materials increased dimensional stability and also makes the tape easier to handle when cutting and punching. With a very high initial tack, the adhesive strength of the 3M 300LSE adhesive increases even further depending on time and temperature. 120 µm thick, transparent polyester backing with a 95 µm thick 300LSE series adhesive layer on each side. 110 µm thick, PE-coated, light brown protective paper.

Contents: 55 meter (€0.26* / 1 meter)

Variants from €4.82*

€14.47*

Tyrolit Non-woven pins DxD 80x50 For steel, stainless steel and non-ferrous metals, A GROB, shape: 52LA, Art. 908862

TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.

€7.63*

S-K-S EPDM 3mmx75mmx10m black self-adhesive on one side

The single-sided EPDM adhesive tapes consist of a closed-cell EPDM foam. They are ideal for sealing against dust and moisture, e.g. in household appliances, computers and other electronic devices. Due to their excellent acoustic properties, these adhesive tapes are also suitable for damping and soft mounting of sensitive appliance parts.

Contents: 10 meter (€4.49* / 1 meter)

Variants from €4.18*

€44.90*

3M Scotchcal printing film IJ170Cv3-10 White 1.37m x 50m

Moulded PVC film (50 µm), solvent-based adhesive (removable with heat) with Comply Version 3. 8-year service life. Can also be applied in light beads and over rivets. Recommended protective laminate: 8518/8520.

Contents: 50 meter (€24.35* / 1 meter)

€1,217.68*

3M Scotch-Weld polyolefin-based hotmelt adhesive 3731 TC Q, beige, 15.8 mm x 203 mm, 5 kg

3M Scotch-Weld 3731 is a polyolefin-based hotmelt adhesive. The product with 100 % solids content is particularly suitable for bonding low-energy plastics. The hot melt adhesive also impresses with its excellent impact resistance and good peel strength as well as its very high temperature resistance up to 130 °C. Scotch-Weld 3731 is used, for example, for bonding plastics such as PE, PP etc.

Contents: 5 kilogram (€68.77* / 1 kilogram)

€343.85*