Variants
The 3M polyurethane seam sealers consist of a high-strength 1-component adhesive sealant and cure to a robust, flexible material within 24 hours in humid conditions. (The curing speed depends on the bead thickness and the ambient conditions) Temperature resistant from -40 °C to +90 °C (up to 120 °C for short periods). Ideal for sealing medium-width and wide car body joints and weld seams. Also suitable for wood and plastic. Can be applied directly to bare steel; suitable as a weld-through sealant. The product must still be moist (within 35 minutes of application). The product must cure (at least 45 minutes) before applying water-based basecoats.
- 1-component polyurethane
- Resistant to water, weak acids or alkalis
- Permanently elastic
- Temperature resistant from - 40°C to + 90°C, short-term + 120°C
- Dries through air humidity
- Recoatable after skin formation
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
P261A Avoid breathing vapour.
P280E Wear protective gloves.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in