3M Perfect-it polishing pad with polishing skin for eccentric polishing machine, medium, white, 150 mm, 34125 (pack = 2 pieces)

The 3M Perfect-It Extra Fine PLUS sanding paste has been specially developed for finishing modern scratch-resistant clear lacquer systems.

The green 3M Perfect-it III polishing foam is used to remove sanding scratches in the first polishing step of the paint finish. It is particularly suitable for use with 3M PLUS sanding compound (green cap), but can of course also be used with any other 3M Perfect-it sanding compound. The smooth, relatively hard polishing foam achieves a very good removal rate. This saves you time and effort, as you can achieve an optimum sanding result more easily and quickly. After use, the pad can be easily cleaned again with water.

The best possible finish on various paints and clear coats with the 3M Perfect-It polishing pads with polishing skin for random orbital polishing machines. Designed for use with the 3M Perfect-It random orbital sander polishing system so you can achieve the desired finish without streaks, swirl marks or holograms.   The 3M Perfect-It Polishing Pads with Polishing Skin for Random Orbital Polishing Machines are designed for paint finishing and polishing for professionals, regardless of experience, who want to achieve a high quality finish. The 3M Perfect-It Coarse Polishing Pads for random orbital polishing machines quickly remove sanding marks with a grit size of 3000 or finer without additional swirl marks. This makes the polishing step easier. The 3M Perfect-It Medium polishing pad for random orbital polishers removes light to medium defects that do not require aggressive removal. Together with the 3M Perfect-It random orbital polisher and 3M Perfect-It random orbital polishing compound, these pads produce a lower spin speed than rotary tools without the risk of sanding through. The 3M Perfect-It polishing pads with polishing skin for random orbital polishing machines are available in diameters of 130 mm and 150 mm and coarse and medium grit sizes. These single-sided pads are equipped with a 3M Hookit attachment for quick change. They are part of the easy-to-use 3M Perfect-It random orbital sander paint finishing system, which includes pads, fluids and tools. The system is designed to achieve a high quality surface finish. The existing standard operating procedure process guide provides step-by-step instructions for paint finishing in car repairs.

The yellow 3M Perfect-it III polishing pad is particularly suitable for use with the 3M Perfect-it III Extra Fine PLUS abrasive paste (yellow cap), but can also be used with all other Perfect-it III abrasive pastes. The soft, open-pored polishing foam is characterised in particular by its waffle structure, which allows the polishing paste to be dispensed sparingly on the one hand and better cooling of the surface on the other. This saves you material, effort and time, as you can set a speed of up to 2,000 revolutions per minute on your sanding machine. The pad can then be easily cleaned again with water.

The green 3M Perfect-it III polishing foam is used to remove sanding scratches in the first polishing step of the paint finish. It is particularly suitable for use with 3M PLUS sanding compound (green cap), but can of course also be used with any other 3M Perfect-it sanding compound. The smooth, relatively hard polishing foam achieves a very good removal rate. This saves you time and effort, as you can achieve an optimum sanding result more easily and quickly. After use, the pad can be easily cleaned again with water.

The blue 3M Ultrafina SE anti-hologram polishing foam is particularly suitable for use with the 3M Perfect-it III anti-hologram polish (blue cap), but can also be used with all other Perfect-it III abrasive pastes. The soft, fine-pored polishing foam is characterised in particular by its waffle structure, which allows the polishing paste to be dispensed sparingly on the one hand and better cooling of the surface on the other. This saves you material, effort and time, as you can set a speed of up to 2,000 revolutions per minute on your sanding machine. In addition to polish residues, the polishing pad can also be used to completely remove holograms and other impurities. Without any micro-scratches. This enables quick and precise reworking without having to return the vehicle to production. The pad can then simply be cleaned again with water.