3M Piezo Inkjet Ink 8814UV, yellow, 5 litres

Variants

Farbe

Litres

Reset selection

€1,564.98* % €0.00* (0.00% saved)

Unit price: €1,564.98* % €0.00*

Unit price (net): €1,315.11 % €0.00

Contents: 5 liter (€313.00* / 1 liter)

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Piezo Inkjet Ink 8814UV, yellow, 5 litres"

3M Piezo Inkjet Digital Inks Series 8800UV were developed as part of the 3M MCS (Matched Component System) warranty programme specifically for printing 3M microprismatic reflective films using Durst Rho 162 TS printers before the film is applied to a traffic sign. When protected by the protective laminate recommended by 3M, the finished traffic signs have an expected lifetime comparable to that of the 3M microprismatic reflective film applied to the sign.

Properties

For use in digital printing on 3M Diamond Grade DG³ reflective film and 3M High Intensity Prismatic reflective film

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Gesundheitsgefahr

Umwelt

Hazard statement / CLP

H318 Causes serious eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H360FD May damage fertility. May damage the unborn child.
H351 Suspected of causing cancer.
H410 Very toxic to aquatic life with long lasting effects.

Prevention

P260A Do not breathe vapour.
P280B Wear protective gloves/eye protection/face protection.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 77824

Part number: 8814UV

SAP number: 7000030855

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

Recently viewed products

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 125, gray, 50 ml

3M Scotch-Weld DP125 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with short processing time achieves high peel strength and is characterised by good ageing properties. Scotch-Weld DP 125 was developed for bonding metals such as steel, aluminium, copper, plastics such as ABS, GRP, PC and glass and ceramics.

Contents: 0.05 liter (€480.80* / 1 liter)

€24.04*

3M SecureFit replacement sweatband for safety helmet, black/grey, X5-BWPD01

The sweatband is reversible and can be removed for cleaning or replacement.original spare part for the 3M SecureFit safety helmets X5000 and X5500.

€5.14*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 490, black, 400 ml

3M Scotch-Weld DP490 is a viscoplastic and thixotropic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very long working time (> 90 minutes) achieves very high peel strength, high shear strength and is characterised by its high temperature resistance. Scotch-Weld DP 490 was developed for bonding metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Contents: 0.4 liter (€322.98* / 1 liter)

Variants from €31.27*

€129.19*

3M Scotch-Brite Roloc flap brush FF-ZR, gray, 63 mm, 32 mm, S, fine #09708

Polishing, matting surfaces, levelling a line pattern after weld seam processing, for example

Variants from €13.51*

€16.89*

Tesakrepp 4319 19mmx50m light brown

tesakrepp 4319 is a highly creped, pliable and tear-resistant paper adhesive tape with a high stretch reserve. This makes it easy to apply in curves or three-dimensionally.

Contents: 50 meter (€0.08* / 1 meter)

Variants from €2.62*

€3.92*

Tyrolit Accessories DxH 115x22 For FIBRE DISC, hardness: HARD, shape: PAD, Art. 709995

The BASIC backing pad is a good addition to all our fibre discs. Especially for surface finishing, this accessory provides good support for achieving the best results.

€9.51*