3M Scotch-Brite compact disk CP-WL, 356 mm 50.8 mm, 203.2 mm, 7, A, crs #58982

Thanks to the practical cube format, your Post-it sticky notes are always to hand and won't run out so quickly. Colourful messages immediately catch the eye and ensure that no important note is forgotten. Post-it Notes adhere securely to paper, can be removed without leaving any residue and stick again and again. As a reminder or for structuring and organising projects - they have become indispensable in the office, school and everyday life. Always to hand: The cube format means you always have your Post-it Notes to hand and plenty of sheets in stock.

The 3M Scotchcast 92-NA U series cast resin bonding set is characterised by its flame resistance in accordance with UL 94-V0 (3 mm). It also has increased chemical resistance to hydrocarbonates. This makes it particularly suitable for use in heavy industry (mining and industry). It is designed for one to five-core, non-armoured low-voltage plastic cables and ensures the electrical insulation and mechanical protection of both compression and screw connectors. The SVHC-free connection set, tested in accordance with EN 50393, can be used indoors and outdoors as well as in the ground or under water. The two-part moulded shell can be folded up in no time at all and closes by automatically snapping into place. It is made of transparent, pink-coloured plastic and thus enables both marking and easy checking of the connector spacing in the socket. The Scotch 23 self-sealing rubber tape ensures optimum sealing of the fitting. A GMG system (closed mixing and pouring) is used when pouring the 3M Scotchcast 1402 FR casting resin, which is also included in the scope of delivery and is flame-retardant. This practically eliminates contact with the casting resin during processing. The transparent mixing bag guarantees visual control of the mixing process. After use, the mixing bag can be disposed of with the cured casting resin residue as normal household waste. Disposal as hazardous waste is not necessary. Flame-retardant and chemically resistant: The cast resin joint set for one to five-core, non-armoured low-voltage cables meets the high requirements of mining and industry.

Technical surface conditioning non-woven tape with T-Lock (reclosable), the patented buttonhole fastener. For removing light scratches and oxide layers, matting, satin finishing and deburring on "closed" Pipe constructions and handrails.

The Scotch-Brite Deburr and Finish PRO compact deburring and finishing disc uses precision-moulded 3M grains bonded to a nylon cloth to deliver increased performance and life for deburring and finishing applications. Our pressed compact discs are soft but as wear resistant as iron to minimise disc changes.   Use the Scotch-Brite PRO compact disc for high grinding performance and long service life in deburring and finishing work. Our smooth-running pressed compact discs remove burrs quickly and cleanly. They are soft to prevent damage, but as strong and wear-resistant as iron and therefore need to be replaced less frequently. They are manufactured with precision-moulded ceramic abrasive grains bonded to a nylon mesh. The hardness of the ceramic material in combination with the self-sharpening grain extends the service life and work can be carried out more quickly without compromising the desired smooth result or the adjustable processing with Scotch-Brite abrasive discs. The PRO compact discs for deburring and finishing are ideal for OEM and pipework renovation and maintenance. These robust high-performance grinding discs reliably remove dirt, corrosion deposits and other contaminants without stressing or impairing the thread form. This means that pipework can be put back into operation more quickly.

This wheel was developed by optimising the specification for cutting rails. Despite extreme operating conditions such as moisture, cold and temperature fluctuations, the rail cutting disc from TYROLIT offers short cutting times with little effort. Particularly clean and bright cutting surfaces reduce rework and labour times. Developed for use on hand-held cut-off machines with electric or petrol motors. Suitable for pure freehand and guided freehand applications.

TYROLIT spiral bands are required for fine and deburring work as well as for moulding complex workpieces. A combination of zirconium and additional coolant allows them to be used on many different materials. A wide range of available grit sizes allows you to vary between very high material removal and fine work. Simple mounting of the spiral bands on a shaft or an expandable mandrel. You will also find the accessories in our range.