3M Scotch-Brite Precision non-woven disc, PN-DH, coarse, 125 mm x 22.23 mm

In combination with the DME19DP drill motor, the dry core bits with TGD technology are the perfect solution for drill rig-guided dry drilling applications in reinforced concrete.

The 3M Peltor G3000 head protection combination is optimised for the special requirements of the forestry industry and offers effective protection for the head, face and hearing. The 3NV315J combination is neon green and includes the 3M Peltor H31P3E earmuffs with an attenuation value of SNR=28dB(A) and the 5J mesh visor made of etched metal in addition to the G3000 safety helmet. The safety helmet made of UV-stabilised ABS plastic has a headband with a ratchet fastener for quick and precise size adjustment and a soft leather sweatband. Unlike conventional helmets with ventilation, the G3000 has significantly more ventilation slits. This maximum permissible ventilation area on the top of the helmet shell ensures an exceptionally high level of comfort even during physically strenuous work in warm environments. The extra short peak ensures optimum visibility. The slim, round shape also reduces the risk of getting caught on branches, for example. The Peltor G3000 safety helmet also offers an advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Particularly practical: The patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The high-quality sweat leather is easy to replace if necessary and ensures maximum hygiene. The 3M Peltor G3000 head protection combination is used in forestry, agriculture and horticulture. The combination is FPA tested. The helmet is suitable for head widths from 53 - 62 cm.

The material is metal-free and therefore non-conductive and non-corrosive. For use on glass indoors. Two different types are available: Dichroic Chill alternates between cold colours such as blue/magenta/yellow and gold/blue. Dichroic Blaze alternates between warm colours such as cyan/blue/magenta and red/gold.

The 3M stone chip protection water-based / with structure is a 100 per cent solvent-free stone chip protection with a high-quality appearance. It offers effective protection against stone chipping and weather-related corrosion damage to wheel arches, front and rear skirts, side skirts and mudguards. It is also suitable for creating cosmetic seam seals. A colour change indicates complete drying. A maximum heat input of 40 °C to 45 °C accelerates the drying process considerably. Immediately after this colour change and up to 72 hours afterwards, you can paint over the stone chip protection with a water-based paint. Priming or even intermediate sanding is not necessary. It is available in the colours black and grey.

The TYROLIT FAST CHANGE enables very fast disc changes thanks to the Velcro fastener. The stable paper backing enables high-speed sanding on many surfaces. This product gives you a particularly even finish on lacquers, paints and composite materials. In addition, a special stearate layer reduces clogging and clogging of the disc, thereby increasing its service life.

tesa 64284 is a tear-resistant strapping tape based on a MOPP film with a natural rubber adhesive.