3M Scotch-Weld 2-component acrylate-based construction adhesive for the EPX system DP 8825 NS, green, 490 ml
Variants
3M Scotch-Weld DP8825NS is a viscoplastic 2-component construction adhesive based on acrylate for the EPX system. The non-flowing product with a short processing time has a low odour and is characterised by very high shear, impact and peel strengths. Scotch-Weld DP 8825 NS is also slightly oil-tolerant and has been developed for bonding plastics such as ABS, PC, PMMA, PVC etc. as well as metals.
- Tough elastic
- Very high shear strength
- Very high impact and peel strength
- Processing time of 22 to 24 minutes
- Mixing ratio 10:1
- Contains glass beads for adjusting the adhesive layer thickness
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- Short processing time
- Non-flowing
- Low odour
- Good adhesion to powder-coated surfaces
- High temperature resistance up to 100°C
- Initial loading of the joined parts possible after a short time
- Slightly oil-tolerant
- Low halogen
- Low-odour formulation for a more pleasant working environment
- Longer shelf life without cooling
- Bonding of plastics such as ABS, PC, PMMA and PVC etc. as well as metals
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H360D May cause harm to the unborn child.
H412 Harmful to aquatic life with long lasting effects.
P201 Obtain special instructions before use.
P280E Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 IF skin irritation or rash occurs: Get medical advice/attention.
P308+ P313 IF exposed or concerned: get medical advice/attention.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in