3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 190, gray, 400 ml

Variants

Reset selection
€110.44* % €0.00* (0.00% saved)
Unit price: €110.44* % €0.00*
Unit price (net): €92.81 % €0.00
Contents: 0.4 liter (€276.10* / 1 liter)
Delivery time up to 90 working days

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 190, gray, 400 ml"

3M Scotch-Weld DP190 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long working time achieves high peel strength and is characterised by good levelling properties as well as its simple and fast processing. Scotch-Weld DP 190 is UL-specified and has been developed for bonding metals such as steel, aluminium, copper, plastics such as ABS, GRP, PC, rubber and other materials.

Properties
  • Working time of 90 minutes
  • Good levelling properties
  • Flexible
  • High peel force
  • Dynamic and shock load
  • UL-listed
  • Mixing ratio 1:1
  • Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages
  • Long processing time
Product benefits
  • Long processing time allows joining of large surfaces
  • Exact positioning of the parts to be joined possible
Field of application
  • Bonding of metals such as steel, aluminium, copper, plastics such as ABS, GRP, PC, rubber and other materials
Signal word
Attention
Hazard pictogram(s)

Ausrufezeichen

Umwelt

Hazard statement / CLP

H319 Causes serious eye irritation. 
H315 Causes skin irritation. 
H317 May cause an allergic skin reaction. 
H411 Toxic to aquatic life with long lasting effects.

Prevention

P280E Wear protective gloves. 
P273 Avoid release to the environment.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. 
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Article no: 10777
Part number: 190400
SAP number: 7100200490
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Zubehör

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*
3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine
Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*
3M VHB cleaning cloths 150mmx150mm
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*
S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm
Breite in mm: 45 mm | Typ: S-K-S
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*
S-K-S 550 Cleaner Isopropanol 99.9% 1 liter
ml: 1000 ml
The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

Variants from €19.99*
€16.99*

Recently viewed products

3M Scotchcast 470-B, polyurethane cable resin, 2-component GMG system, size B, 200 ml
Scotchcast casting resin no. 470 is a standard two-component polyurethane cable resin. It cures at room temperature and generates only a low exothermic reaction temperature. Due to its excellent hydrolytic stability, the premium resin is also suitable for long-term applications under water. It adheres well to both metal and various plastics and is ideal for insulation and sealing as well as for mechanical protection in the low-voltage range. The practical two-chamber bag contains coordinated quantities of resin and hardener, which can be combined into a homogeneous mass by simply tearing open the separating seam and then kneading. The transparency of the bag allows visual inspection during mixing. The GMG system (closed mixing and moulding) virtually eliminates contact with casting resin during processing. After casting, the mixing bag with the cured casting resin residue can simply be disposed of with normal household waste. Disposal as hazardous waste is not necessary.

Contents: 0.2 liter (€126.50* / 1 liter)

€25.30*
3M ET 1183 Copper foil, smooth, with conductive adhesive, tinned, 25 mm x 16.5 m x 0.07 mm
The 3M EMC copper shielding tape 1183 is a tin-coated copper foil with a conductive acrylic adhesive. The tin ensures particularly good solderability and is compatible with a wide range of base materials, such as galvanised steels, aluminium, lead and tin alloys. Its excellent corrosion resistance and very good stampability significantly extend its range of applications. With an electrical resistance of five milliohms, the copper foil, which is only 0.066 millimetres thick, has good conductivity and can also be used for earthing and discharging electrostatic charges in addition to EMC applications. The adhesive tape is flame-retardant in accordance with UL 510 and its adhesive is resistant to solvents, which ensures long-lasting functionality.

Contents: 16.5 meter (€6.28* / 1 meter)

Variants from €27.37*
€103.68*
Tesapack 4089 PP 38mmx66m chamois
tesapack 4089 is an adhesive packaging tape based on a PP film with a strong natural rubber adhesive.

Contents: 66 meter (€0.02* / 1 meter)

€1.58*
TYROLIT cut-off wheels DxUxH 125x2.5x22.23 For stone, shape: 42 - offset version, Art. 367787
This STANDARD cutting disc offers power-reduced work thanks to its very good cutting ability. When used on stone materials, the disc impresses with clean cutting edges and good cutting quality. This means no unnecessary reworking.

€1.74*
Tyrolit A-B01 C JX Fabric rolls TxH 40x25 Universally applicable, P80, mould: ROLL, Art. 705841
With the flexible fabric rollers from TYROLIT you can process almost any material. Finishing the surfaces requires preparation, either by hand or with an orbital sander. When working on wood, paint and varnish, we recommend using the BASIC fabric rollers for hand-guided sanding. We recommend using the fabric rollers on the orbital sander for finishing coatings, smoothing and cleaning composite materials and for clean intermediate sanding.

Contents: 25 meter (€0.69* / 1 meter)

€17.34*
3M Post-it Page marker 670-5, 15 mm x 50 mm, neon yellow, neon green, neon orange, neon pink, violet, 5 x 100 sheets
Bring structure to your documents with the Post-it Page Marker - there is a choice of three colours and the paper strips are particularly wide. They are ideal for writing short messages such as telephone numbers, prices or reference numbers. Thanks to their bright neon colours, they can be seen at a glance. Structure through colour: With the Post-it Page Marker you can add structure to your documents - there are 3 colours to choose from and the paper strips are extra wide.

Contents: 0.05 meter (€68.00* / 1 meter)

€3.40*
Average product rating
4.93/5
Store reviews
Score is calculated from 1232 reviews from the last 12 months out of a total of 3198 reviews.
09.04.2024
.