3M Scotch-Weld Structural Epoxy Adhesive EC-9323 B/A, 1 Liter, Red Orange

Variants

Farbe

Litres

Reset selection

€190.63* % €0.00* (0.00% saved)

Unit price: €190.63* % €0.00*

Unit price (net): €160.19 % €0.00

Contents: 1 liter

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotch-Weld Structural Epoxy Adhesive EC-9323 B/A, 1 Liter, Red Orange"

Scotch-Weld EC 9323 B/A was developed for bonding metals such as aluminium, steel, a variety of plastics and composite materials such as SMC, GRP, CFRP and epoxy resin laminates. The product is characterised by low flowability, high shear, peel and impact strength and good resistance to oils, fuels and damp heat.

Properties

Resistant to oils, moist heat and fuels
Low flow properties
Extremely high mechanical strength over a wide temperature range after curing
Excellent resistance to environmental influences and chemicals commonly encountered in the aerospace industry

Advantages

Excellent resistance to environmental influences and chemicals commonly found in the aerospace industry

Product benefits

Excellent resistance to environmental influences and chemicals commonly found in the aerospace industry

Field of application

Excellent adhesion to a variety of substrates such as metal, glass, ceramics and plastics

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Hazard statement / CLP

H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.

Prevention

P260B Do not breathe dust.
P280D Wear protective gloves, protective clothing and eye/face protection.

Reaction

P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTRE or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 10796

Part number: 9323.1

SAP number: 7000080436

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

3M Scotch-Brite Hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

Customers also bought

TYROLIT cut-off wheels DxDxH 125x1.0x22.23 Super-thin cut-off wheels for steel and stainless steel, shape: 41 - straight version, Art. 34332792 / promotion

With the next generation PREMIUM 2in1 cut-off wheels, you can increase performance while significantly reducing tool wear. With a thickness of 1.0 to 1.6 mm, these super-thin 2in1 cut-off wheels have been developed for processing steel and stainless steel. The chemical purity of these tools is a prerequisite for machining stainless steels. This prevents negative effects on the material such as corrosion, pitting or a reduction in fatigue strength. In addition to a significant increase in productivity, these cut-off wheels offer environmentally friendly working by reducing the amount of waste.

€8.33*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 105, transparent, 48.5 ml

3M Scotch-Weld DP105 is a flexible 2-component construction adhesive based on epoxy resin for the EPX system. The product with very short processing time achieves high peel strength and is characterised by transparency, pourability and quick and easy processing. This construction adhesive is particularly effective on materials with different and high expansion coefficients. Scotch-Weld DP 105 has been developed for bonding metals such as steel, aluminium, copper and a wide range of plastics as well as wood, etc.

Contents: 0.05 liter (€480.80* / 1 liter)

€24.04*

S-K-S meter stick / folding rule, 2 meters, white, angle function, material: beech wood, 1 piece

Folding rule 2 m in white with a two-colour scale (black/red). There is an angle measuring function at both ends.

€3.95*

3M Perfect-It 09374 Fine sanding paste 1 litre

3M Perfect-it III abrasive paste is used to remove medium to heavy oxidation marks and scratches on paintwork in order to restore the original paint quality.

€44.71*

TYROLIT CERABOND X Fibre discs CA-P94 DxH 125x22 For steel and stainless steel, P60, shape: DISC V, Art. 34486202

The new fibre discs from TYROLIT guarantee maximum aggressiveness, an unassailable service life and maximum comfort when machining steel and stainless steel. This is made possible by the self-sharpening ceramic grain in combination with an innovative bond. The combination of blue-fired ceramic grit and our unique bond system guarantees lasting aggressiveness and an unimpeachable service life. The CERABOND X fibre disc is the best choice for fast and comfortable work on steel and stainless steel. With Cerabond X you can reach your goal faster - both when surface grinding and when removing weld seams as well as when derusting or deburring.

€1.23*

S-K-S Waiter's knife l Metal bottle opener

Metal waiter's knife with bottle opener, foil cutter and corkscrew with 2 lifting steps. Corks and crown caps can be elegantly removed with the waiter's knives

€4.00*