3M Scotchcal colour film 50-90 ultramarine blue 1.22m x 50m

Arbeitshandschuh aus weichem Ziegenleder. Daumen und Zeigefinger aus Ziegenleder. Oberhand aus blauem Baumwollstrick. Eingenähter Gummizug am Handgelenk

The yellow 3M EMS iD ball marker - Gas makes the marking and subsequent location of underground gas pipes extremely easy. It can be located to a maximum depth of 1.20 metres, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for all types of soil. The free-floating design in a watertight PE sphere ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the sphere is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage power lines. The EMS iD markers are supplied with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly onto the cable/location plan. If the ball marker receives the "Read"-Signal from a 3M Dynatel cable locator, it transmits the information previously stored in it. The iD markers can be temporarily or permanently programmed to store user-defined information such as cable or joint data, type of application or other important details. Once this data has been read by the locator, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.

Arbeitshandschuh mit Handrücken aus Rindspalt. Handfläche aus Rindsleder. Verstärkter Daumen. Eingenähter Gummizug am Handgelenk. Breite Baumwollstulpe

Scotch-Brite SC-BS non-woven belts for finishing work are used for matting stainless steel, brass, copper and aluminium and are very well suited for dry sanding thanks to a built-in lubricant, but can be used with all common sanding additives.

The 3M NTW-HAT heat-shrink tubing is a thin-walled heat-shrink tubing made from modified, heavy-duty elastomers with a shrink ratio of two to one. The flexible heat-shrink tubing is abrasion and UV-resistant as well as resistant to many chemical influences, especially oil and diesel. It is therefore particularly suitable for aviation, railway and military applications. It has an adhesive coating on the inner wall for better sealing. It is self-extinguishing and can be used in a temperature range of -55 °C to +150 °C. The heat-shrink tubing is RoHS-compliant, is labelled VG-95343/5D and also complies with the German Military (BWB) K16/99087, VDE 94972 and IEC 60684-3-271:2004 test standards. The black thin-walled elastomer heat-shrinkable tubing NTW-HT has a very thin wall thickness and is self-extinguishing and abrasion-resistant. It impresses with its good chemical resistance. Shrink ratio 2:1, temperature range -75°C - +150°C

Blauer Einweg-Schuhüberzug aus Polyethylen (2-6g). Eingenähter Gummizug oben